554 open source boards using the ESP32-S3-WROOM-1
Real designs built with the ESP32-S3-WROOM-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4kESP32
BitaxeGamma
bitaxeorg
56.5 × 99.8 mm90 parts4LCERN-OHL-S-2.0430ESP32
Communicator
Hack-a-Day
148 × 81 mm47 parts2LMIT105ESP32
Kaleido 6" controller based on epdiy v7
vroland
138.1 × 104.6 mm121 parts4LCC-BY-SA-4.074ESP32
Open motorcycle intercom
d3vv3
100 × 50 mm116 parts4LMIT68ESP32
ESP32AY-revD2
djspawnbrest
55 × 100 mm127 parts2LGPL-3.059ESP32
Thermal camera
Badbird5907
98 × 56 mm41 parts2LMIT55ESP32
LiteWingV2.5C
jobitjoseph
100 × 100 mm76 parts2LCC-BY-NC-4.054ESP32
BitaxeSupra
bitaxeorg
56.5 × 99.8 mm89 parts4LCERN-OHL-S-2.034ESP32
Tiny sensor
larry-wong
22 × 71 mm18 parts2LNo license34ESP32
JPL.mp3
jpetkauskas
40 × 100 mm60 parts4LNo license32ESP32
Bailabox main board v2
dr-harvey
168.6 × 70 mm74 parts2LCC-BY-SA-4.027ESP32
BitaxeUltra
bitaxeorg
56.5 × 99.8 mm85 parts4LCERN-OHL-S-2.025ESP32
ESP32S3-AI-Voice-Assistant
DhamuVkl
60 × 60 mm72 parts2LMIT25ESP32
YR-PCB-v0.4
PROTONMM
113.5 × 33 mm27 parts2LGPL-3.022ESP32
Combadge
Pippadi
33.7 × 31 mm34 parts2LGPL-3.020ESP32
VCU
sufst
194.3 × 92.8 mm205 parts4LGPL-3.019- schematic only · 74 partsESP32
CoolKidsBadge-2024
tixlegeek
74 partsGPL-3.018 ESP32
Oniondao badge
OnionDAO-git
76.6 × 141.1 mm116 parts2LNo license17ESP32
Wireless-Stepper-Motor-Controller
Circuit-Digest
42.3 × 42.3 mm55 parts2LMIT17ESP32
BitForge-Nano
WantClueTechnologies
55 × 120 mm183 parts6LCERN-OHL-S-2.015ESP32
Mkey
MabezDev
346.2 × 95.5 mm162 parts2LApache-2.015ESP32
Nomad
0Zane
65 × 120 mm69 parts2LMIT15ESP32
Core v2
OpenShock
40 × 56 mm38 parts2LCERN-OHL-S-2.015ESP32
Lingcordion
LingDong-
75.6 × 113 mm55 parts2LNo license14ESP32
MoleNet V7.1
ComNets-Bremen
106 × 66.8 mm70 parts4LGPL-3.013ESP32
GlowPad
StuckAtPrototype
108 × 70 mm40 parts2LApache-2.013ESP32
Plantomation
Synthron
100 × 100 mm193 parts4LNo license10ESP32
ESP32-S3-Platform
WhirlingBits
97.5 × 90.6 mm176 parts4LMIT10ESP32
Blinky badge light
rowr111
108.6 × 87.8 mm105 parts4LMIT9ESP32
Zeen-AI-Plug
ampnics
105 × 58 mm71 parts2LNo license9ESP32
WaterRowerLinkPlus
nickbits1024
55 × 95 mm47 parts2LMIT9ESP32
Neosword
wrickert
217.1 × 77.1 mm70 parts2LNo license8ESP32
Mesh hand
sneakylizard123-4
50 × 75 mm67 parts4LNo license8ESP32
Insta360link controller
jfwoods
153 × 149 mm42 parts2LNo license8ESP32
Bittyaxe
BeeEvolved
55.5 × 66.9 mm85 parts4LCERN-OHL-S-2.07
How designs wire the ESP32-S3-WROOM-1
Read from the KiCad layouts of 404 open source designs, one per repository: what each pin of the ESP32-S3-WROOM-1 connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a pull-up to 3.3V on 341 of 404 designs, most often 10 kΩ (then 5.1 kΩ).
- The EN pin has a capacitor to GND on 315 of 404 designs, most often 1 µF (then 100 nF).
- The 3V3 pin is tied to 3.3V on 364 of 404 designs (GND on 3, a signal on 37).
- The IO35 pin is left unconnected on 297 of 395 designs (a signal on 97).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 40, 41 | Connected to: GND 96% | — |
| 3V3pin 2 | Connected to: 3.3V 90% | — |
| ENpin 3 | Connected to: A connector 21% |
|
| IO46pin 16 | Connected to: Not connected 71% · a signal 28% | — |
| IO45pin 26 | Connected to: Not connected 69% · a signal 31% | — |
| IO0pin 27 | Connected to: A connector 22% |
|
| IO35pin 28 | Connected to: Not connected 75% · a signal 25% | — |
| IO36pin 29 | Connected to: Not connected 75% · a signal 25% | — |
| IO37pin 30 | Connected to: Not connected 76% · a signal 24% | — |
30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bitaxe by skot, Easyduino ESP32S3 by Hanqaqa, BitaxeGamma by bitaxeorg and Communicator pcb by Hack-a-Day.
The ESP32-S3-WROOM-1 in open source designs
The gallery holds 554 open source boards using the ESP32-S3-WROOM-1 from 433 GitHub repositories; a typical one measures about 78 × 71 mm and carries around 64 components.
65% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.
The most starred is Bitaxe by skot.
Parts used alongside the ESP32-S3-WROOM-1
Microcontrollers on boards using the ESP32-S3-WROOM-1
What boards using the ESP32-S3-WROOM-1 are built for
ESP32-S3-WROOM-1: common questions
Where can I find a ESP32-S3-WROOM-1 reference design?
Each of the 554 boards on this page is a real design using the ESP32-S3-WROOM-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-S3-WROOM-1 EN pin?
The EN pin has a pull-up to 3.3V on 341 of 404 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 404 open source designs using the ESP32-S3-WROOM-1.
How is the ESP32-S3-WROOM-1 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 364 of 404 designs (GND on 3, a signal on 37). Counted from the KiCad layouts of 404 open source designs using the ESP32-S3-WROOM-1.
How is the ESP32-S3-WROOM-1 IO35 pin connected?
The IO35 pin is left unconnected on 297 of 395 designs (a signal on 97). Counted from the KiCad layouts of 404 open source designs using the ESP32-S3-WROOM-1.
What parts are used alongside the ESP32-S3-WROOM-1?
The AMS1117-3.3, USBLC6-2SC6, AP2112K-3.3, TP4056-42-ESOP8 and CH340C appear in the most repositories here.
Which microcontrollers do boards using the ESP32-S3-WROOM-1 use?
Most are built on ESP32 (549) and RP2040/RP2350 (5).
How big is a typical board using the ESP32-S3-WROOM-1?
The median is 78 × 71 mm, and 65% are two-layer designs.
What is the most popular open source board using the ESP32-S3-WROOM-1?
By GitHub stars, Bitaxe by skot, with 1,375 stars.
Can I simulate one of these boards using the ESP32-S3-WROOM-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.