P.003
GSAS-LABS·P.003·P.003-V1.0.1/P.003-V1.0.1.kicad_pcb
About the P.003 PCB
P.003 is an open source AVR/Arduino PCB design by GSAS-LABS, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 42 × 78 mm, with 19 components from 12 distinct parts.
Its main chip is the ATtiny85-20P, from the AVR/Arduino family. Other key parts include the 74HC595. By type, the board carries 10 resistors, 3 switches, 2 ICs, 1 transistor, 1 battery holder and 1 LED.
It belongs with the power & battery designs in this gallery.
From the project
Digital dice based on an ATtiny85 and 74HC595. Supports D4, D6, D8, and D10 modes, with configurable rolling animation, button-based type selection, EEPROM persistence, and low-power sleep mode for extended battery life.
P.003 is a compact digital dice designed around the ATtiny85 microcontroller.
The project uses a 74HC595 shift register to control the display while minimizing the number of microcontroller pins required.
The dice supports multiple modes and remembers the selected configuration between power cycles.
The board includes an ON/OFF power switch.
Move the switch to the ON position to power the device.

Main components on the P.003
P.003 bill of materials (BOM)
19 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATtiny85-20P | DIP-8_W7.62mm | U1 |
| 1 | 74HC595 | DIP-16_W7.62mm | U2 |
| 1 | BS250 | TO-92_Inline | Q1 |
| 1 | 3V | BatteryHolder_Keystone_3008_1x2450 | BT1 |
| 1 | ON/OFF | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW1 |
| 1 | Mode | SW_PUSH_6mm_H4.3mm | SW2 |
| 1 | Roll | SW_PUSH_6mm_H4.3mm | SW3 |
| 1 | Display | 7SegmentLED_LTS6760_LTS6780 | AFF1 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 2.2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 8 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6, R7, R8, R9, R10 |
P.003 design files
The KiCad project lives in the GSAS-LABS/P.003 repository on GitHub; these links point at the commit this page was built from.
P.003: common questions
What microcontroller does the P.003 use?
The P.003 is built around the ATtiny85-20P, from the AVR/Arduino family.
How big is the P.003 PCB?
The P.003 measures 42 × 78 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the P.003?
19 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the P.003 design files?
From the GSAS-LABS/P.003 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the P.003 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which GSAS-LABS chose for the repository.
Can I test firmware for the P.003 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k