Maki nita cart
gustavostuff·maki-nita·tools/kicad/cart-pcb/maki-nita-cart.kicad_pcb
About the Maki nita cart PCB
Maki nita cart is an open source PCB design by gustavostuff, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 44 × 37 mm, with 5 components from 3 distinct parts.
Other key parts include the AVR128DB28. By type, the board carries 3 capacitors, 1 IC and 1 connector.
It belongs with the audio designs in this gallery.
From the project
A portable Arcade tabletop with a 16x16 LED screen
Maki-Nita is a cartridge-based, two-player portable tabletop Arcade. The name comes from maquinita, the Mexican word generally used for an arcade machine. The display is four white 8x8 LED matrices in a 16x16 field. Graphics are 1-bit (LEDs are either ON or OFF).
On a similar spirit as the Magnavox Odyssey and the Vectrex, Maki-Nita uses colored, translucent sheets to cover the screen. So the overlay is an extension of the cartridge, part of the game experience. A magnetic marquee runs along the top and the cartridge sits behind it. The overlays and design docs cover the sheet and the system…

Main components on the Maki nita cart
Maki nita cart bill of materials (BOM)
5 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AVR128DB28 | DIP-28_W7.62mm | U1 |
| 1 | Cart edge 2x10 | Cart_Edge_2x10_P2.54mm | J1 |
| 3 | 100 nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3 |
Maki nita cart design files
The KiCad project lives in the gustavostuff/maki-nita repository on GitHub; these links point at the commit this page was built from.
Maki nita cart: common questions
How big is the Maki nita cart PCB?
The Maki nita cart measures 44 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Maki nita cart?
5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Maki nita cart design files?
From the gustavostuff/maki-nita repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Maki nita cart design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which gustavostuff chose for the repository.
More boards in maki-nita
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687