HardLabs

Da pimp plus

gutierrezps·da-pimp-plus·kicad-project/da-pimp-plus/da-pimp-plus.sch

This repository ships a schematic but no board layout.

About the Da pimp plus PCB

Da pimp plus is an open source AVR/Arduino PCB design by gutierrezps, published on GitHub under the MIT license. It is a board, with 1 components from 1 distinct parts.

Its main chip is the Arduino_Pro_Mini, from the AVR/Arduino family.

It belongs with the power & battery and displays & leds designs in this gallery.

From the project

DA PIMP Plus - Improved battery desulfator

Improved Battery Desulfator, based on Mikey Sklar's project. This repository has both the schematic and the Arduino firmware, developed and built with PlatformIO.

Arduino Pro Mini MCU Graphical 16x2 LCD Charge, discharge and float modes Voltage and current sensing * Time display (how long has it been on selected mode)

JP1 and JP2 are used to select the max charging current (82 mA if both disconnected, 164 mA if either is connected, 246 mA if both connected) V1, V2 and V3 are the voltage measurements for each mode (charge, discharge and float) R1 and R2 are 2W resistors J1 is used to connect…

Main components on the Da pimp plus

Arduino_Pro_Mini

Da pimp plus bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Arduino_Pro_Mini
A1

Da pimp plus design files

The KiCad project lives in the gutierrezps/da-pimp-plus repository on GitHub; these links point at the commit this page was built from.

Da pimp plus: common questions

What microcontroller does the Da pimp plus use?

The Da pimp plus is built around the Arduino_Pro_Mini, from the AVR/Arduino family.

How many components are on the Da pimp plus?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Da pimp plus design files?

From the gutierrezps/da-pimp-plus repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Da pimp plus design in my own project?

Yes, under the terms of its MIT license, which gutierrezps chose for the repository.

Can I test firmware for the Da pimp plus without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards