Bms4-cpp
GyrocopterLLC·bms4-cpp·hardware/bms4_f051.kicad_pcb
About the Bms4-cpp PCB
Bms4-cpp is an open source STM32 PCB design by GyrocopterLLC, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 35 mm, with 58 components from 21 distinct parts.
Its main chip is the STM32F051K8Tx, from the STM32 family. Other key parts include the OPA2171, ISO7721D and L78L33_SOT89. By type, the board carries 27 resistors, 12 capacitors, 8 transistors, 5 ICs, 5 connectors and 1 diode.

Main components on the Bms4-cpp
Bms4-cpp bill of materials (BOM)
58 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | OPA2171 | TSSOP-8_3x3mm_P0.65mm | U1, U2 |
| 1 | ISO7721D | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | STM32F051K8Tx | LQFP-32_7x7mm_P0.8mm | U4 |
| 1 | L78L33_SOT89 | SOT-89-3 | U5 |
| 4 | Q_NMOS_GDS | SOT-23 | Q1, Q2, Q5, Q6 |
| 4 | DCX114Y | SOT-363_SC-70-6 | Q3, Q4, Q7, Q8 |
| 2 | Conn_01x04 | JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical | J1, J4 |
| 1 | Conn_01x05 | JST_XH_B05B-XH-A_1x05_P2.50mm_Vertical | J2 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | LTST-C155GEKT | LTST-C155GEKT | D1 |
| 7 | 100n | C_0603_1608Metric | C1, C2, C7, C8, C10, C11, C12 |
| 2 | 100n | C_0805_2012Metric | C3, C4 |
| 1 | 4.7u | C_0805_2012Metric | C5 |
| 1 | 330n | C_0805_2012Metric | C6 |
| 1 | C | C_0603_1608Metric | C9 |
| 8 | 100k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | 20k | R_0603_1608Metric | R9, R10, R11, R12, R13, R14, R15, R16 |
| 4 | 33 | R_2512_6332Metric | R17, R18, R23, R24 |
| 2 | 100 | R_0603_1608Metric | R19, R20 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10k | R_0603_1608Metric | R21, R22, R25, R26, R27 |
Bms4-cpp design files
The KiCad project lives in the GyrocopterLLC/bms4-cpp repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/bms4_f051.kicad_pcb
- Schematichardware/bms4_f051.kicad_sch
Bms4-cpp: common questions
What microcontroller does the Bms4-cpp use?
The Bms4-cpp is built around the STM32F051K8Tx, from the STM32 family.
How big is the Bms4-cpp PCB?
The Bms4-cpp measures 50 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bms4-cpp?
58 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bms4-cpp design files?
From the GyrocopterLLC/bms4-cpp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bms4-cpp design in my own project?
Yes, under the terms of its MIT license, which GyrocopterLLC chose for the repository.
Can I test firmware for the Bms4-cpp without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k