2 open source boards using the ISO7721D

Real designs built with the ISO7721D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ISO7721D in open source designs

The gallery holds 2 open source boards using the ISO7721D from 2 GitHub repositories; a typical one measures about 50 × 35 mm and carries around 58 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Bms4-rust by GyrocopterLLC.

Parts used alongside the ISO7721D

Microcontrollers on boards using the ISO7721D

What boards using the ISO7721D are built for

ISO7721D: common questions

Where can I find a ISO7721D reference design?

Each of the 2 boards on this page is a real design using the ISO7721D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ISO7721D?

The L78L33_SOT89, OPA2171 and STM32F051K8Tx appear in the most repositories here.

Which microcontrollers do boards using the ISO7721D use?

Most are built on STM32 (2).

How big is a typical board using the ISO7721D?

The median is 50 × 35 mm, and 100% are two-layer designs.

What is the most popular open source board using the ISO7721D?

By GitHub stars, Bms4-rust by GyrocopterLLC, with 1 stars.

Can I simulate one of these boards using the ISO7721D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part