6 open source boards using the STM32F051K8Tx

Real designs built with the STM32F051K8Tx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the STM32F051K8Tx

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32F051K8Tx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 4.7 µF).
  • The BOOT0 pin has a resistor to GND on 6 of 6 designs, most often 10 kΩ.
  • The PF0 pin is left unconnected on 5 of 6 designs.
  • The PF1 pin is left unconnected on 5 of 6 designs.
VDDpin 1, 17Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (20), 4.7 µF (3), 10 µF (2)
PF0pin 2Connected to: Not connected 83% · a signal 17%
PF1pin 3Connected to: Not connected 83% · a signal 17%
NRSTpin 4Connected to: A connector 83%
  • Capacitor to GND on 50% · 100 nF (1)
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
VDDApin 5Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 67% · 100 nF (6), 10 nF (2), 1 µF (2)
PA0pin 6Connected to: OPA2171 33%
  • Series resistor on 67% · 20 kΩ (2), 33 kΩ (1), 100 Ω (1)
PA1pin 7Connected to: OPA2171 33%
  • Series resistor on 67% · 33 kΩ (3), 20 kΩ (2), 100 Ω (1)
PA4pin 10Connected to: OPA2171 33%
  • Pull-up to 3.3V on 50% · 10 kΩ (2), 1 kΩ (1)
  • Series resistor on 50% · 20 kΩ (2), 33 kΩ (1)
PA5pin 11Connected to: OPA2171 33% · not connected 17%
  • Series resistor on 50% · 20 kΩ (2), 33 kΩ (1)
VSSpin 16, 32Connected to: GND 100%
PA11pin 21Connected to: Not connected 83% · a signal 17%
PA12pin 22Connected to: Not connected 83% · a signal 17%
PB4pin 27Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 10 Ω (1), 100 Ω (1)
PB5pin 28Connected to: Not connected 67% · a signal 33%
PB7pin 30Connected to: A connector 33% · not connected 33%
  • Pull-up to 5V on 33% · 4.7 kΩ (1), 10 kΩ (1)
BOOT0pin 31Connected to: A connector 33%
  • Resistor to GND on 100% · 10 kΩ (6)

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include YouTube-Pet to-Filament by Alper-UYANIK, Fly ESC with stm32F051 by fademike, MidiLedController hw by cracked-machine and Bms4-rust by GyrocopterLLC.

The STM32F051K8Tx in open source designs

The gallery holds 6 open source boards using the STM32F051K8Tx from 6 GitHub repositories; a typical one measures about 50 × 36.3 mm and carries around 58 components.

83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is YouTube-Pet to-Filament by Alper-UYANIK.

Parts used alongside the STM32F051K8Tx

Microcontrollers on boards using the STM32F051K8Tx

What boards using the STM32F051K8Tx are built for

STM32F051K8Tx: common questions

Where can I find a STM32F051K8Tx reference design?

Each of the 6 boards on this page is a real design using the STM32F051K8Tx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F051K8Tx VDD pin?

The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the STM32F051K8Tx.

What resistor goes on the STM32F051K8Tx BOOT0 pin?

The BOOT0 pin has a resistor to GND on 6 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the STM32F051K8Tx.

How is the STM32F051K8Tx PF0 pin connected?

The PF0 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the STM32F051K8Tx.

What parts are used alongside the STM32F051K8Tx?

The ISO7721D, L78L33_SOT89 and OPA2171 appear in the most repositories here.

Which microcontrollers do boards using the STM32F051K8Tx use?

Most are built on STM32 (6).

How big is a typical board using the STM32F051K8Tx?

The median is 50 × 36.3 mm, and 83% are two-layer designs.

What is the most popular open source board using the STM32F051K8Tx?

By GitHub stars, YouTube-Pet to-Filament by Alper-UYANIK, with 6 stars.

Can I simulate one of these boards using the STM32F051K8Tx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part