SYNCHRO Booster

h07jonas·SYNCHRO·Hardware/SYNCHRO_Booster/v3.0/SYNCHRO_Booster.kicad_pcb

SYNCHRO Booster PCB layout, top view — open source board by h07jonas

About the SYNCHRO Booster PCB

SYNCHRO Booster is an open source PCB design by h07jonas, published on GitHub. It is a 2-layer board measuring 71.1 × 67.3 mm, with 43 components from 27 distinct parts.

Other key parts include the L6203, LM393P, 6N137 and 74HC02. By type, the board carries 13 resistors, 12 capacitors, 5 ICs, 5 diodes, 4 connectors and 2 switches.

From the project

SYNCHRO System for Yielding Networked CHannel Rail Operation SYNCHRO is a modular, high-performance digital model railroad control ecosystem architecture based on the DCC (Digital Command Control) standard. Designed for robust deployment and high signal integrity, the system stri

SYNCHRO System for Yielding Networked CHannel Rail Operation SYNCHRO is a modular, high-performance digital model railroad control ecosystem architecture based on the DCC (Digital Command Control) standard. Designed for robust deployment and high signal integrity, the system strictly separates timing and network logic from high-power distribution. Key design pillars include deterministic signal generation, total galvanic isolation to prevent ground loops, and autonomous hardware-level fault management.

Main components on the SYNCHRO Booster

SYNCHRO Booster bill of materials (BOM)

43 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
L6203
IC1
1
LM393P
U1
2
6N137
U2, U3
1
74HC02
U5
1
Conn_01x02_Pin
J1
1
Power_Input
J2
1
B4B-XH-A
J3
1
Messpunkt
J4
1
MF-R185-2-99
F1
1
R-78E5.0-0.5
PS1
1
SW_Push
SW1
1
SW_SPDT
SW2
2
1N4148
D1, D2
1
SMAJ16CA-E3/61
D3
2
LED
D4, D5
5
100nF
C1, C9, C10, C11, C12
2
470uF
C2, C3
1
10nF
C4
3
22nF 50V
C5, C6, C7
1
10uF 50V
C8
Show 7 more
QtyPartRefs
1
100m
R1
4
1k
R2, R4, R12, R13
1
24k
R3
3
4,7k
R5, R9, R10
1
10
R6
2
1,2k
R7, R8
1
10k
R11

SYNCHRO Booster design files

The KiCad project lives in the h07jonas/SYNCHRO repository on GitHub; these links point at the commit this page was built from.

SYNCHRO Booster: common questions

How big is the SYNCHRO Booster PCB?

The SYNCHRO Booster measures 71.1 × 67.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SYNCHRO Booster?

43 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SYNCHRO Booster design files?

From the h07jonas/SYNCHRO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SYNCHRO Booster design in my own project?

The repository has no license, so all rights stay with h07jonas. Use it as a reference, and ask the author before reusing the design.

More boards in SYNCHRO