SYNCHRO Zentrale

h07jonas·SYNCHRO·Hardware/SYNCHRO_Zentrale/SYNCHRO_Zentrale.kicad_pcb

SYNCHRO Zentrale PCB layout, top view — open source ESP32 board by h07jonas

About the SYNCHRO Zentrale PCB

SYNCHRO Zentrale is an open source ESP32 PCB design by h07jonas, published on GitHub. It is a 2-layer board measuring 84.5 × 90.2 mm, with 53 components from 19 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the MC74VHCT541ADWR2G and AZ1117CH-3.3TRG1. By type, the board carries 12 capacitors, 12 resistors, 10 connectors, 7 diodes, 6 switches and 4 ICs.

It belongs with the iot & wireless designs in this gallery.

From the project

SYNCHRO System for Yielding Networked CHannel Rail Operation SYNCHRO is a modular, high-performance digital model railroad control ecosystem architecture based on the DCC (Digital Command Control) standard. Designed for robust deployment and high signal integrity, the system stri

SYNCHRO System for Yielding Networked CHannel Rail Operation SYNCHRO is a modular, high-performance digital model railroad control ecosystem architecture based on the DCC (Digital Command Control) standard. Designed for robust deployment and high signal integrity, the system strictly separates timing and network logic from high-power distribution. Key design pillars include deterministic signal generation, total galvanic isolation to prevent ground loops, and autonomous hardware-level fault management.

Main components on the SYNCHRO Zentrale

SYNCHRO Zentrale bill of materials (BOM)

53 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
MC74VHCT541ADWR2G
IC1, IC2
1
AZ1117CH-3.3TRG1
IC3
1
ESP32-S3-WROOM-1-N8R8
U1
1
GSB22120RSKEU
J1
8
B4B-XH-A_LF__SN_
J2, J3, J4, J5, J6, J7, J8, J9
1
694106301002
J10
1
R-78E3.3-0.5
PS1
1
R-78E5.0-1.0
PS2
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6
1
PMEG3010ER
D1
6
LED
D2, D3, D4, D5, D6, D7
2
22uF
C1, C12
2
0.1uF
C2, C4
1
1uF
C3
5
10uF
C5, C6, C9, C10, C11
2
100nF
C7, C8
6
10k
R1, R2, R3, R4, R5, R6
5
220
R7, R8, R9, R10, R11
1
470
R12

SYNCHRO Zentrale design files

The KiCad project lives in the h07jonas/SYNCHRO repository on GitHub; these links point at the commit this page was built from.

SYNCHRO Zentrale: common questions

What microcontroller does the SYNCHRO Zentrale use?

The SYNCHRO Zentrale is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.

How big is the SYNCHRO Zentrale PCB?

The SYNCHRO Zentrale measures 84.5 × 90.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SYNCHRO Zentrale?

53 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SYNCHRO Zentrale design files?

From the h07jonas/SYNCHRO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SYNCHRO Zentrale design in my own project?

The repository has no license, so all rights stay with h07jonas. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SYNCHRO Zentrale without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in SYNCHRO

Similar boards