Entwicklerboard
ha-y-z·Diplom-Thesis-Smart-Solar-Seeker·Diplomarbeit/Steven Dudek/Entwicklerboard/Entwicklerboard/Entwicklerboard.kicad_pcb
About the Entwicklerboard PCB
Entwicklerboard is an open source ESP32 PCB design by ha-y-z, published on GitHub. It is a 2-layer board measuring 103.6 × 161 mm, with 66 components from 41 distinct parts.
Its main chip is the ESP-32-Node-MCU, from the ESP32 family. Other key parts include the 904 and TPS54331. By type, the board carries 20 capacitors, 19 connectors, 12 resistors, 4 transistors, 4 diodes and 3 ICs.
It belongs with the power & battery designs in this gallery.
From the project
My high school diploma thesis about a solar panel which seeks to the sun by itself.
The paper hand in deals with the tracking of the sun, which follows the position of the sun, to get the maximum efficiency. Solar technology is a renewable energy source, that contributes to a sustainable environment. In contrast to flat lying solar panels, it is possible to produce more energy through tracking. A prototype has been developed and constructed which performs mostly all our tasks that we need.
Main components on the Entwicklerboard
Entwicklerboard bill of materials (BOM)
66 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 904 | 904 | IC1 |
| 2 | TPS54331 | NE555DR | U1, U2 |
| 2 | Q_NJFET_DGS | TO-220-3_Vertical | Q1, Q2 |
| 1 | ESP-32-Node-MCU | ESP32-NodeMCU | Q3 |
| 1 | NEO6MV2 | GY-NEO6MV2 | Q4 |
| 2 | VCC | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J2 |
| 1 | Relais | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | Relai_1 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | Relai_5V | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | Relai_2 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | Relai_24V | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | 5V | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J8 |
| 1 | 3_3V | PinSocket_1x02_P2.54mm_Vertical | J9 |
| 1 | 24V_Steuerpins | PinSocket_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_01x01_Female | PinSocket_1x01_P2.54mm_Vertical | J11 |
| 1 | Solarpanel_klein | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J12 |
| 2 | USB_A | USB_A_CNCTech_1001-011-01101_Horizontal | J13, J14 |
| 1 | USB_Pins | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J15 |
| 2 | Conn_01x02_Female | PinSocket_1x02_P2.54mm_Vertical | J16, J17 |
| 1 | Conn_01x03_Female | PinSocket_1x03_P2.54mm_Vertical | J18 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J19 |
| 1 | SANYOU_SRD_Form_C | Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | G5Q-1A | Relay_SPST_Omron-G5Q-1A | K2 |
| 2 | D_Schottky | D_SMB_Handsoldering | D1, D4 |
| 2 | B340 | D_SMC | D2, D3 |
| 1 | 12µH | L_Toroid_Vertical_L31.8mm_W15.9mm_P13.50mm_Bourns_5700 | L1 |
| 1 | 22µH | L_Toroid_Vertical_L41.9mm_W19.1mm_P15.80mm_Vishay_TJ7 | L2 |
| 4 | 4.7µF | C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C1, C2, C3, C4 |
| 4 | 0.01µF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C5, C6, C8, C10 |
| 2 | 0.1µF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C7, C9 |
| 2 | 1000pF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C11, C12 |
| 2 | 47pF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C13, C14 |
| 2 | 100nF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C15, C16 |
| 4 | 47µF | EEETC1V470P | C17, C18, C19, C20 |
| 2 | 332k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R3 |
| 2 | 68.1k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R4 |
| 2 | 1Meg | R_MiniMELF_MMA-0204 | R5, R6 |
| 2 | 29.4k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8 |
| 2 | 10.2k | R_MiniMELF_MMA-0204 | R9, R11 |
| 1 | 2k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R10 |
| 1 | 3.24k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R12 |
Entwicklerboard design files
The KiCad project lives in the ha-y-z/Diplom-Thesis-Smart-Solar-Seeker repository on GitHub; these links point at the commit this page was built from.
Entwicklerboard: common questions
What microcontroller does the Entwicklerboard use?
The Entwicklerboard is built around the ESP-32-Node-MCU, from the ESP32 family.
How big is the Entwicklerboard PCB?
The Entwicklerboard measures 103.6 × 161 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Entwicklerboard?
66 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Entwicklerboard design files?
From the ha-y-z/Diplom-Thesis-Smart-Solar-Seeker repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Entwicklerboard design in my own project?
The repository has no license, so all rights stay with ha-y-z. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Entwicklerboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Diplom-Thesis-Smart-Solar-Seeker
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k