HardLabs

Hackducky

hackclub·hackducky·pcb/v1/hackducky_v1.kicad_pcb

Hackducky PCB layout, top view — open source RP2040/RP2350 board by hackclub

About the Hackducky PCB

Hackducky is an open source RP2040/RP2350 PCB design by hackclub, published on GitHub. It is a 2-layer board measuring 70 × 19 mm, with 45 components from 31 distinct parts.

Its main chip is the USBLC6-2P6, from the RP2040/RP2350 family. Other key parts include the W25Q16JVSS and AP2112K-3.3. By type, the board carries 17 capacitors, 15 resistors, 4 diodes, 3 ICs, 3 connectors and 2 switches.

From the project

HackDucky is a compact, powerful RP2040-based USB device inspired by the concept of a "USB Rubber Ducky" — but fully open-source and customizable. It features dual USB ports (Type-A & Type-C), RGB status indicator, SD card support, and a generous 16MB flash. Ideal for scripting,

HackDucky is a compact, powerful RP2040-based USB device inspired by the concept of a "USB Rubber Ducky" — but fully open-source and customizable. It features dual USB ports (Type-A & Type-C), RGB status indicator, SD card support, and a generous 16MB flash. Ideal for scripting, automation, HID emulation, and more!

RP2040 Microcontroller – Dual-core Arm Cortex-M0+ @ 133MHz 16MB Flash – Plenty of room for Ducky scripts, firmware, and more USB-C & USB-A Ports – Plug into any host device with ease Micro SD Card Slot – Store payloads, logs, or configs externally RGB Neopixel – Visual feedback…

Main components on the Hackducky

W25Q16JVSSAP2112K-3.3USBLC6-2P6

Hackducky bill of materials (BOM)

45 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
W25Q16JVSS
XC6206PxxxMR
U1
1
AP2112K-3.3
W25Q64JVZPIQ
U2
1
USBLC6-2P6
RP2040
U3
1
CRYSTAL_GND24
Crystal_GND23
Y1
1
USB_C_Receptacle_USB2.0_16P
J1
1
CONN_02X02_TOP_BOTTOM
Micro_SD_Card
J2
1
USB_A
J3
1
SW_Push
SW1
1
SW_Push
SW2
1
WS2812B
LED
D1
1
MBR1020VL
LED
D3
1
WS2812B
S-LMBR340FT1G
D4
1
S-LMBR340FT1G
D5
2
15p
C1, C2
2
1u
C3, C4
1
10u
C5
1
100n
C6
4
100NF
100n
C7, C8, C11, C17
2
1UF
1u
C9, C10
2
15PF
100n
C12, C13
Show 11 more
QtyPartRefs
2
1UF
100n
C14, C15
1
100N
100n
C16
2
5.1k
R1, R2
1
1k
R3
1
5.1K
330
R4
1
5.1K
1k
R5
1
5.1K
DNF
R6
1
27.4
R7
1
27.4
R8
6
10k
R9, R10, R11, R12, R13, R14
1
330?
R15

Hackducky design files

The KiCad project lives in the hackclub/hackducky repository on GitHub; these links point at the commit this page was built from.

Hackducky: common questions

What microcontroller does the Hackducky use?

The Hackducky is built around the USBLC6-2P6, from the RP2040/RP2350 family.

How big is the Hackducky PCB?

The Hackducky measures 70 × 19 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hackducky?

45 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hackducky design files?

From the hackclub/hackducky repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hackducky design in my own project?

The repository has no license, so all rights stay with hackclub. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hackducky without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Earlier revisions in the repo: hackducky

Similar boards