Pcb sample preamp
haiha-ux·pcb-sample-preamp
About the Pcb sample preamp
Pcb sample preamp is an open source PCB design by haiha-ux, published on GitHub. It is a 2-layer board measuring 100 × 78 mm, with 47 components from 18 distinct parts.
Other key parts include the INA163UA. By type, the board carries 20 resistors, 12 capacitors, 6 diodes, 5 connectors, 2 ICs and 2 jumpers.
It belongs with the audio designs in this gallery.
From the project
2-channel phantom-powered (48V) mic preamp, TI INA163 — KiCad 10 schematic + hand-routed 2-layer PCB, ERC/DRC clean, BOM with MPNs, Gerbers
Owner: Hai (GitHub haiha-ux). This is a test and portfolio project, not client work.
A KiCad 10.0.6 project: schematic and a 2-layer 100 × 78 mm PCB, with ERC/DRC reports, fab outputs and renders. The audio signal path is routed by hand. Only power, the phantom feed and ground are autorouted. Every file is generated by the scripts in tools/, so the whole design can be rebuilt from scratch.

Main components on the Pcb sample preamp
Pcb sample preamp bill of materials (BOM)
47 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | INA163UA Texas Instruments | SOIC-14_3.9x8.7mm_P1.27mm | U1, U2 |
| 2 | NC3FAH1 Neutrik | Jack_XLR_Neutrik_NC3FAH1_Horizontal | J1, J2 |
| 1 | 22284030 PWR +15/GND/-15 Molex | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | 22284020 P48 +48/GND Molex | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 22284040 OUT1/GND/OUT2/GND Molex | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 2 | 22284030 P48 ON=1-2 OFF=2-3 Molex | PinHeader_1x03_P2.54mm_Vertical | JP1, JP2 |
| 4 | BAV99,215 BAV99 Nexperia | SOT-23 | D1, D2, D11, D12 |
| 2 | SMAJ16A Littelfuse | D_SMA | D21, D22 |
| 4 | UVP1J470MPD 47u 63V NP Nichicon | C_Radial_D10.0mm_H20.0mm_P5.00mm | C1, C2, C11, C12 |
| 4 | CC0805KRX7R9BB104 100n YAGEO | C_0805_2012Metric | C3, C4, C13, C14 |
| 2 | CL31B106KAHNNNE 10u 25V Samsung Electro-Mechanics | C_1206_3216Metric | C21, C22 |
| 1 | 4701010812R00 47u 100V NJCON | CP_Radial_D8.0mm_P3.50mm | C23 |
| 1 | CL21B104KCFNNNE 100n 100V Samsung Electro-Mechanics | C_0805_2012Metric | C24 |
| 8 | RT1206BRD073K4L 3.40k YAGEO | R_1206_3216Metric | R1, R2, R9, R10, R11, R12, R19, R20 |
| 2 | 0805W8F4702T5E 47k UNI-ROYAL | R_0805_2012Metric | R3, R13 |
| 4 | RT0805BRD072K2L 2.2k YAGEO | R_0805_2012Metric | R4, R5, R14, R15 |
| 4 | CRF0805Q10R0BN 10R SIE | R_0805_2012Metric | R6, R7, R16, R17 |
| 2 | FRC0805F60R4TS 60.4R FOJAN | R_0805_2012Metric | R8, R18 |
Pcb sample preamp design files
The KiCad project lives in the haiha-ux/pcb-sample-preamp repository on GitHub; these links point at the commit this page was built from.
Pcb sample preamp: common questions
How big is the Pcb sample preamp?
The Pcb sample preamp measures 100 × 78 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb sample preamp?
47 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pcb sample preamp design files?
From the haiha-ux/pcb-sample-preamp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pcb sample preamp design in my own project?
The repository has no license, so all rights stay with haiha-ux. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687