DualHbridgeDaughterboardDesign
About the DualHbridgeDaughterboardDesign PCB
DualHbridgeDaughterboardDesign is an open source PCB design by halherta, published on GitHub. It is a 2-layer board measuring 100 × 53.5 mm, with 29 components from 11 distinct parts.
Other key parts include the MIC4427 and 74HC08. By type, the board carries 9 diodes, 8 transistors, 5 ICs, 4 connectors, 2 capacitors and 1 resistor.
From the project
My PCB Designs
This is a Repo of some of My PCB Designs. More to follow...
Main components on the DualHbridgeDaughterboardDesign
DualHbridgeDaughterboardDesign bill of materials (BOM)
29 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MIC4427 | SO-8_3.9x4.9mm_P1.27mm | U1, U2, U5, U6 |
| 1 | 74HC08 | SO-14_3.9x8.65mm_P1.27mm | U3 |
| 4 | AOD4189 | TO-252-2 | Q1, Q2, Q5, Q7 |
| 4 | AOD66406 | TO-252-2 | Q3, Q4, Q6, Q8 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_Altech_AK300-2_P5.00mm | J1, J2, J4 |
| 1 | DaughterBoard | DaughterBoardTemplate | J3 |
| 8 | B250 | D_SMB | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D9 |
| 1 | 330u | CP_Elec_8x10 | C1 |
| 1 | 0.1u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 1.6k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
DualHbridgeDaughterboardDesign design files
The KiCad project lives in the halherta/KiCadProj repository on GitHub; these links point at the commit this page was built from.
DualHbridgeDaughterboardDesign: common questions
How big is the DualHbridgeDaughterboardDesign PCB?
The DualHbridgeDaughterboardDesign measures 100 × 53.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DualHbridgeDaughterboardDesign?
29 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DualHbridgeDaughterboardDesign design files?
From the halherta/KiCadProj repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DualHbridgeDaughterboardDesign design in my own project?
The repository has no license, so all rights stay with halherta. Use it as a reference, and ask the author before reusing the design.
More boards in KiCadProj
Basic Stereo Amp v3
100 × 100 mm74 parts2LNo license1
TPA3122D2 Amplifier
80 × 80 mm45 parts2LNo license1
HeartLEDTHT
87.6 × 74.7 mm24 parts2LNo license1
RailSplitter
75 × 45 mm23 parts2LNo license1
ESP32ESP32-Uno-Board v2
68.8 × 53.3 mm23 parts2LNo license1
16ChannelServoControllerDaughterboardDesign
100 × 53.5 mm18 parts2LNo license1
ESP32MyBaseBoardDesignv1
100 × 100 mm16 parts2LNo license1
Led blinky
80 × 50 mm12 parts2LNo license1
MyPowerBoardDesignv1
45 × 25 mm10 parts2LNo license1