MyBaseBoardDesignv1
About the MyBaseBoardDesignv1 PCB
MyBaseBoardDesignv1 is an open source ESP32 PCB design by halherta, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 16 components from 13 distinct parts.
Its main chip is the ESP32-S3-DevKitC, from the ESP32 family. By type, the board carries 5 diodes, 4 connectors, 4 resistors, 1 IC, 1 transistor and 1 switch.
From the project
My PCB Designs
This is a Repo of some of My PCB Designs. More to follow...
Main components on the MyBaseBoardDesignv1
MyBaseBoardDesignv1 bill of materials (BOM)
16 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DevKitC | ESP32-S3-DevKitC | U1 |
| 1 | DMP6180SK3 | TO-252-2 | Q2 |
| 1 | BaseBoard | BaseBoardTemplate | J1 |
| 1 | Barrel_Jack_Switch | BarrelJack_CUI_PJ-102AH_Horizontal | J2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Altech_AK300-2_P5.00mm | J4 |
| 1 | SW_SPDT | SW_E-Switch_EG1224_SPDT_Angled | SW1 |
| 1 | MMSZ52XXB | D_SOD-123 | D1 |
| 3 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D3, D4 |
| 1 | LSM115JE3 | D_SMA | D5 |
| 1 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 2.4k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 2 | 470 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
MyBaseBoardDesignv1 design files
The KiCad project lives in the halherta/KiCadProj repository on GitHub; these links point at the commit this page was built from.
MyBaseBoardDesignv1: common questions
What microcontroller does the MyBaseBoardDesignv1 use?
The MyBaseBoardDesignv1 is built around the ESP32-S3-DevKitC, from the ESP32 family.
How big is the MyBaseBoardDesignv1 PCB?
The MyBaseBoardDesignv1 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MyBaseBoardDesignv1?
16 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MyBaseBoardDesignv1 design files?
From the halherta/KiCadProj repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MyBaseBoardDesignv1 design in my own project?
The repository has no license, so all rights stay with halherta. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MyBaseBoardDesignv1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in KiCadProj
Basic Stereo Amp v3
100 × 100 mm74 parts2LNo license1
TPA3122D2 Amplifier
80 × 80 mm45 parts2LNo license1
DualHbridgeDaughterboardDesign
100 × 53.5 mm29 parts2LNo license1
HeartLEDTHT
87.6 × 74.7 mm24 parts2LNo license1
ESP32ESP32-Uno-Board v2
68.8 × 53.3 mm23 parts2LNo license1
RailSplitter
75 × 45 mm23 parts2LNo license1
16ChannelServoControllerDaughterboardDesign
100 × 53.5 mm18 parts2LNo license1
Led blinky
80 × 50 mm12 parts2LNo license1
MyPowerBoardDesignv1
45 × 25 mm10 parts2LNo license1
Earlier revisions in the repo: myBaseBoardDesign
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k