TPA3122D2 Amplifier

halherta·TPA3122D2_Amplifier

TPA3122D2 Amplifier PCB layout, top view — open source board by halherta

About the TPA3122D2 Amplifier PCB

TPA3122D2 Amplifier is an open source PCB design by halherta, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 80 mm, with 46 components from 30 distinct parts.

Other key parts include the TPA3122D2. By type, the board carries 19 capacitors, 8 test points, 6 resistors, 4 connectors, 2 switches and 2 diodes.

It belongs with the audio designs in this gallery.

From the project

Stereo 15W +15W Class D amplifier design based on the TPA3122D2 IC

A stereo 15W + 15W, all through-hole Class D amplifier board built around the Texas Instruments TPA3122D2, designed in KiCad. The board is also compatible with the pin-compatible TPA3125D2 (10W stereo).

The TPA3122D2 is, to the author's knowledge, the only through-hole Class D amplifier IC. It comes in a 20-pin DIP package and needs only a relatively simple LC filter on its output. That makes this board a good fit for:

TPA3122D2 Amplifier, from the project README
From the project README

Main components on the TPA3122D2 Amplifier

TPA3122D2 Amplifier bill of materials (BOM)

46 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPA3122D2
U1
1
AOI21357
Q1
1
Barrel_Jack_Switch
J1
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J2
1
AUDIOJACK3
AudioJack3
J3
1
SCREW_TERMINAL_01X04
Screw_Terminal_01x04
J4
1
10K
10k
RV1
1
MUTE
SW1
1
PWR OFF
SW2
1
VCC
TP1
1
GND
TP2
1
RIN
TP3
1
LIN
TP4
1
LOUT
TP5
1
ROUT
TP6
1
~{SD}
TP7
1
MUTE
TP8
1
1N47XXA
1N47xxA
D1
1
LED
D2
2
22U
22u
L1, L2
Show 10 more
QtyPartRefs
5
470U
470u
C1, C10, C11, C12, C13
2
10U
10u
C2, C17
5
1u
C3, C4, C5, C18, C19
2
0.22U
0.22u
C6, C9
2
0.68U
0.68u
C7, C8
3
100N
100n
C14, C15, C16
1
100K
100k
R1
1
2.4K
2.4k
R2
2
10K
10k
R3, R4
2
4.7K
4.7k
R5, R6

TPA3122D2 Amplifier design files

The KiCad project lives in the halherta/TPA3122D2_Amplifier repository on GitHub; these links point at the commit this page was built from.

TPA3122D2 Amplifier: common questions

How big is the TPA3122D2 Amplifier PCB?

The TPA3122D2 Amplifier measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TPA3122D2 Amplifier?

46 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TPA3122D2 Amplifier design files?

From the halherta/TPA3122D2_Amplifier repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TPA3122D2 Amplifier design in my own project?

Yes, under the terms of its MIT license, which halherta chose for the repository.

Similar boards