ZU64DR RFSOC
About the ZU64DR RFSOC PCB
ZU64DR RFSOC is an open source PCB design by hamedroghani, published on GitHub. It is a 12-layer board measuring 200 × 150 mm, with 87 components from 79 distinct parts.
Other key parts include the XCZU64DR-2FSVE1156I, UCD9090A, TPS546D24A, TPS7A8300 and INA226AIDGSR. By type, the board carries 48 ICs, 37 connectors, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the ZU64DR RFSOC
ZU64DR RFSOC bill of materials (BOM)
87 components, 79 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XCZU64DR-2FSVE1156I | XCZU64DR_FSVE1156 | U1A |
| 1 | UCD9090A UCD9090A POWER SEQUENCER | UCD9090A_VQFN52 | U101 |
| 6 | TPS546D24A | TPS546D24A_WQFN40 | U111, U112, U113, U114, U115, U116 |
| 4 | TPS7A8300 | TPS7A8300_WQFN20 | U117, U118, U119, U120 |
| 1 | INA226AIDGSR INA226 VCCINT MONITOR | INA226_MSOP10 | U131 |
| 1 | LMK04828BISQ LMK04828B | LMK04828_WQFN48 | U201 |
| 1 | LMX2594RHA LMX2594 LO A | LMX2594_VQFN40 | U202 |
| 1 | LMX2594RHA LMX2594 LO B | LMX2594_VQFN40 | U203 |
| 1 | DDR4_X8_BYTE0 | DDR4_FBGA96_0_8mm | U301 |
| 1 | DDR4_X8_BYTE1 | DDR4_FBGA96_0_8mm | U302 |
| 1 | DDR4_X8_BYTE2 | DDR4_FBGA96_0_8mm | U303 |
| 1 | DDR4_X8_BYTE3 | DDR4_FBGA96_0_8mm | U304 |
| 1 | DDR4_X8_BYTE4 | DDR4_FBGA96_0_8mm | U305 |
| 1 | DDR4_X8_BYTE5 | DDR4_FBGA96_0_8mm | U306 |
| 1 | DDR4_X8_BYTE6 | DDR4_FBGA96_0_8mm | U307 |
| 1 | DDR4_X8_BYTE7 | DDR4_FBGA96_0_8mm | U308 |
| 1 | DDR4_X8_BYTE8 | DDR4_FBGA96_0_8mm | U309 |
| 1 | MT25QU512ABB8ESF-0SIT MT25QU512ABB QSPI | SOIC8_3_9x4_9mm | U401 |
| 1 | MTFC32GAPALBH-IT 32GB eMMC 8-bit | EMMC_FBGA153_0_5mm | U402 |
| 1 | FT4232HQ FT4232H USB-JTAG-UART | FT4232H_LQFP64 | U403 |
Show 59 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RX0_FRONTEND | RF_CHAIN_MODULE_QFN24 | U601 |
| 1 | RX1_FRONTEND | RF_CHAIN_MODULE_QFN24 | U602 |
| 1 | RX2_FRONTEND | RF_CHAIN_MODULE_QFN24 | U603 |
| 1 | RX3_FRONTEND | RF_CHAIN_MODULE_QFN24 | U604 |
| 1 | RX4_FRONTEND | RF_CHAIN_MODULE_QFN24 | U605 |
| 1 | RX5_FRONTEND | RF_CHAIN_MODULE_QFN24 | U606 |
| 1 | RX6_FRONTEND | RF_CHAIN_MODULE_QFN24 | U607 |
| 1 | RX7_FRONTEND | RF_CHAIN_MODULE_QFN24 | U608 |
| 1 | TX0_FRONTEND | RF_CHAIN_MODULE_QFN24 | U701 |
| 1 | TX1_FRONTEND | RF_CHAIN_MODULE_QFN24 | U702 |
| 1 | TX2_FRONTEND | RF_CHAIN_MODULE_QFN24 | U703 |
| 1 | TX3_FRONTEND | RF_CHAIN_MODULE_QFN24 | U704 |
| 1 | TX4_FRONTEND | RF_CHAIN_MODULE_QFN24 | U705 |
| 1 | TX5_FRONTEND | RF_CHAIN_MODULE_QFN24 | U706 |
| 1 | TX6_FRONTEND | RF_CHAIN_MODULE_QFN24 | U707 |
| 1 | TX7_FRONTEND | RF_CHAIN_MODULE_QFN24 | U708 |
| 1 | KSZ9031RNXIA KSZ9031RNX 1G PHY | KSZ9031_QFN48 | U801 |
| 1 | FT4232HQ FT4232H MGMT USB | FT4232H_LQFP64 | U802 |
| 1 | INA226AIDGSR TMP451/TMP468 TEMP | INA226_MSOP10 | U803 |
| 1 | INA226AIDGSR INA226 PMBUS | INA226_MSOP10 | U804 |
| 1 | OCXO-10MHZ-25X22 10MHz OCXO | OCXO_SMD_25x22mm | Y201 |
| 1 | 12V DC INPUT | DC_INPUT | J101 |
| 1 | FAN PWM 4-PIN | FAN_4PIN | J131 |
| 1 | 10MHz REF IN SMA | SMA_EDGE | J201 |
| 1 | 10MHz IN SMA | SMA_EDGE | J201_2 |
| 1 | PPS IN/OUT SMA | SMA_EDGE | J202 |
| 1 | 14-pin JTAG | IDC_14PIN_2x7_2_54mm | J401 |
| 1 | PS REF CLK TEST | SMA_EDGE | J402 |
| 1 | SFP28_1 | SFP28_CAGE_REVIEW | J501 |
| 1 | SFP28_2 | SFP28_CAGE_REVIEW | J502 |
| 1 | RX0_SMA | SMA_EDGE | J601 |
| 1 | RX1_SMA | SMA_EDGE | J602 |
| 1 | RX2_SMA | SMA_EDGE | J603 |
| 1 | RX3_SMA | SMA_EDGE | J604 |
| 1 | RX4_SMA | SMA_EDGE | J605 |
| 1 | RX5_SMA | SMA_EDGE | J606 |
| 1 | RX6_SMA | SMA_EDGE | J607 |
| 1 | RX7_SMA | SMA_EDGE | J608 |
| 1 | TX0_SMA | SMA_EDGE | J701 |
| 1 | TX1_SMA | SMA_EDGE | J702 |
| 1 | TX2_SMA | SMA_EDGE | J703 |
| 1 | TX3_SMA | SMA_EDGE | J704 |
| 1 | TX4_SMA | SMA_EDGE | J705 |
| 1 | TX5_SMA | SMA_EDGE | J706 |
| 1 | TX6_SMA | SMA_EDGE | J707 |
| 1 | TX7_SMA | SMA_EDGE | J708 |
| 1 | RJ45 MAGJACK | RJ45_MAGJACK_TH | J801 |
| 1 | PWM FAN | FAN_4PIN | J802 |
| 1 | PCIe Gen4 x8 Edge | PCIE_X8_EDGE_CONNECTOR | J901 |
| 1 | PL GPIO HEADER | IDC_20PIN_2x10_2_54mm | J902 |
| 1 | PMOD/DEBUG HEADER | IDC_20PIN_2x10_2_54mm | J903 |
| 1 | 12V POWER CABLE INPUT | CONN_2PIN_5_08mm | J1001 |
| 1 | FIBER PORT 1 | SFP28_CAGE_REVIEW | J1002 |
| 1 | FIBER PORT 2 | SFP28_CAGE_REVIEW | J1003 |
| 1 | JTAG CABLE | IDC_14PIN_2x7_2_54mm | J1004 |
| 1 | USB-C MGMT | USB_C_Receptacle_SMD | J1005 |
| 1 | FAN CABLE | FAN_4PIN | J1006 |
| 1 | DEBUG HARNESS | IDC_20PIN_2x10_2_54mm | J1007 |
| 1 | CFS-0404MB BOOT MODE DIP/HDR | DIP_SWITCH_4POS | SW401 |
ZU64DR RFSOC design files
The KiCad project lives in the hamedroghani/ZU64DR_RFSOC_KiCad repository on GitHub; these links point at the commit this page was built from.
- LayoutZU64DR_RFSOC_A5.kicad_pcb
- SchematicZU64DR_RFSOC_A5.kicad_sch
- BOMBOM_ZU64DR_A5.csv
ZU64DR RFSOC: common questions
How big is the ZU64DR RFSOC PCB?
The ZU64DR RFSOC measures 200 × 150 mm, has 12 copper layers and is 1.6 mm thick.
How many components are on the ZU64DR RFSOC?
87 components, from 79 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ZU64DR RFSOC design files?
From the hamedroghani/ZU64DR_RFSOC_KiCad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ZU64DR RFSOC design in my own project?
The repository has no license, so all rights stay with hamedroghani. Use it as a reference, and ask the author before reusing the design.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979