Axi uart fpga usbc board

hananeaouragh-ops·axi-uart-fpga-usbc-board·pcb/AXI_UART_PCB.kicad_pcb

Axi uart fpga usbc board layout, top view — open source board by hananeaouragh-ops

About the Axi uart fpga usbc board

Axi uart fpga usbc board is an open source PCB design by hananeaouragh-ops, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 35 mm, with 6 components from 5 distinct parts.

Other key parts include the AMS1117-3.3 and FT232RL. By type, the board carries 2 ICs, 2 connectors and 2 capacitors.

It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.

From the project

AXI4-Lite UART peripheral in Verilog for Cyclone II (Quartus II, ModelSim) with a USB-C to UART breakout board designed in KiCad 10.

An end-to-end embedded hardware design project combining Verilog RTL development, FPGA synthesis, simulation-based verification, and custom PCB design.

The project implements an AXI4-Lite UART IP core with transmit and receive FIFOs, a configurable baud rate generator, and a self-checking Verilog testbench. It also includes a custom two-layer USB-C to UART breakout PCB designed in KiCad 10 using the FT232RL USB-to-UART bridge.

Axi uart fpga usbc board, from the project README
From the project README

Main components on the Axi uart fpga usbc board

Axi uart fpga usbc board bill of materials (BOM)

6 components, 5 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
FT232RL
U2
1
USB_C
J1
1
Conn_01x06_Pin
J2
2
C
C1, C2

Axi uart fpga usbc board design files

The KiCad project lives in the hananeaouragh-ops/axi-uart-fpga-usbc-board repository on GitHub; these links point at the commit this page was built from.

Axi uart fpga usbc board: common questions

How big is the Axi uart fpga usbc board?

The Axi uart fpga usbc board measures 65 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Axi uart fpga usbc board?

6 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Axi uart fpga usbc board design files?

From the hananeaouragh-ops/axi-uart-fpga-usbc-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Axi uart fpga usbc board design in my own project?

Yes, under the terms of its MIT license, which hananeaouragh-ops chose for the repository.

Similar boards