Custom keyboard
hannahhhhhhhhhhhhhhh·custom-keyboard·kicad/keyboard.kicad_pcb
About the Custom keyboard PCB
Custom keyboard is an open source Nordic nRF PCB design by hannahhhhhhhhhhhhhhh, published on GitHub. It is a 2-layer board measuring 303.2 × 100.1 mm, with 130 components from 13 distinct parts.
Its main chip is the XIAO-nRF52840-Plus-SMD, from the Nordic nRF family. By type, the board carries 66 switches, 61 diodes, 2 test points and 1 IC.
It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.
From the project
a custom 60% keyboard
A custom 60% keyboard that I designed from scratch in KiCad. It has 61 keys, runs on a Seeed XIAO nRF52840 Plus, connects over Bluetooth or USB-C, and uses RMK firmware so you can remap every key with Vial. :3 First time doing stuff with vial and rmk, it was quite a learning curve
please excuse the lack of 3d models for the above image: I couldn't add the STEP files to the 3D viewer because my computer keeps crashing when I go to the footprint editor trying to give it a model
Main components on the Custom keyboard
Custom keyboard bill of materials (BOM)
130 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-nRF52840-Plus-SMD | XIAO-nRF52840-Plus-SMD | U1 |
| 4 | MX_stab | STAB_MX_P_2u | S1, S2, S3, S4 |
| 1 | MX_stab | STAB_MX_P_6.25u | S5 |
| 46 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +38 |
| 1 | SW_Push | SW_Cherry_MX_2.00u_PCB | SW14 |
| 2 | SW_Push | SW_Cherry_MX_1.50u_PCB | SW15, SW28 |
| 1 | SW_Push | SW_Cherry_MX_1.75u_PCB | SW29 |
| 2 | SW_Push | SW_Cherry_MX_2.25u_PCB | SW41, SW42 |
| 1 | SW_Push | SW_Cherry_MX_2.75u_PCB | SW53 |
| 7 | SW_Push | SW_Cherry_MX_1.25u_PCB | SW54, SW55, SW56, SW58, SW59, SW60, SW61 |
| 1 | SW_Push | SW_Cherry_MX_6.25u_PCB | SW57 |
| 2 | TestPoint | TestPoint_Bridge_Pitch3.81mm_Drill1.3mm | TP1, TP2 |
| 61 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +53 |
Custom keyboard design files
The KiCad project lives in the hannahhhhhhhhhhhhhhh/custom-keyboard repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/keyboard.kicad_pcb
- Schematickicad/keyboard.kicad_sch
Custom keyboard: common questions
What microcontroller does the Custom keyboard use?
The Custom keyboard is built around the XIAO-nRF52840-Plus-SMD, from the Nordic nRF family.
How big is the Custom keyboard PCB?
The Custom keyboard measures 303.2 × 100.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Custom keyboard?
130 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Custom keyboard design files?
From the hannahhhhhhhhhhhhhhh/custom-keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Custom keyboard design in my own project?
The repository has no license, so all rights stay with hannahhhhhhhhhhhhhhh. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Custom keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381