MateLightScrewCapV2
HansAchterbahn·MateLightScrewCapV2
About the MateLightScrewCapV2 PCB
MateLightScrewCapV2 is an open source PCB design by HansAchterbahn, published on GitHub under the MIT license. It is a 2-layer board measuring 24 × 24 mm, with 5 components from 5 distinct parts.
It belongs with the power & battery designs in this gallery.
From the project
This Repo is based on the idea of MateLight and improves it by a screw cap which is easy to install and easy to remove from the coasters. This is the improved version 2 with seperate power supply.
My MateLight project is based on the idea of jaseg's MateLight and improves it with a APA102 LED screw cap PCB which is easy to install and easy to remove from the coasters. An overview about my MateLight project you can find on my MateLight overview page.
In this Repository you can find version 0.2.x of the MateLight-ScrewCap PCB which is made to screw it to a Mate bottle.

MateLightScrewCapV2 bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN | JST_S2B-ZR-SM4A-TF(LF)(SN) | X1 |
| 1 | OUT | JST_S2B-ZR-SM4A-TF(LF)(SN) | X2 |
| 1 | Power | JST_S2B-PH-SM4-TB(LF)(SN) | X3 |
| 1 | Power | JST_S2B-ZR-SM4A-TF(LF)(SN) | X4 |
| 1 | APA102 | APA102C-5050 | LD1 |
MateLightScrewCapV2 design files
The KiCad project lives in the HansAchterbahn/MateLightScrewCapV2 repository on GitHub; these links point at the commit this page was built from.
MateLightScrewCapV2: common questions
How big is the MateLightScrewCapV2 PCB?
The MateLightScrewCapV2 measures 24 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MateLightScrewCapV2?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MateLightScrewCapV2 design files?
From the HansAchterbahn/MateLightScrewCapV2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MateLightScrewCapV2 design in my own project?
Yes, under the terms of its MIT license, which HansAchterbahn chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k