B.Tech-Final-Year-Project
harris8099·B.Tech-Final-Year-Project
About the B.Tech-Final-Year-Project PCB
B.Tech-Final-Year-Project is an open source ESP32 PCB design by harris8099, published on GitHub. It is a 2-layer board measuring 155 × 106 mm, with 22 components from 15 distinct parts.
Its main chip is the ESP32, from the ESP32 family. By type, the board carries 8 resistors, 4 switches, 2 modules, 2 connectors, 1 transistor and 1 transformer.
It belongs with the iot & wireless, sensors and usb & debug tools designs in this gallery.
From the project
ESP32 based Smart motor
The schematic is divided into functional blocks:
Full BOM with supplier links is in ComponentsLinks.xlsx`. Key components:
See sch.pdf for the full schematic with all net labels, component values, and reference designators.
Public Domain (CC0). No warranty expressed or implied.
B.Tech-Final-Year-Project bill of materials (BOM)
22 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ADXL345 | A1 |
| 1 | ~ | ESP32 | M3 |
| 1 | IRLZ34N | TO-220-3_Vertical | Q1 |
| 1 | ~ | PZEM_004T | P1 |
| 1 | ~ | Power_supply | P2 |
| 1 | ~ | Buzzer_12x9.5RM7.6 | B1 |
| 1 | ~ | Hall_sensor | H1 |
| 4 | SW_Push | PinSocket_1x02_P2.54mm_Vertical | SW1, SW2, SW3, SW4 |
| 1 | ~ | DS18B20 | T1 |
| 1 | ~ | TFT_display | D1 |
| 1 | ~ | Logic_convertor | L1 |
| 5 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R6, R7, R8 |
| 1 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 100OHM 100ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | ~ | Relay | R5 |
B.Tech-Final-Year-Project design files
The KiCad project lives in the harris8099/B.Tech-Final-Year-Project repository on GitHub; these links point at the commit this page was built from.
B.Tech-Final-Year-Project: common questions
What microcontroller does the B.Tech-Final-Year-Project use?
The B.Tech-Final-Year-Project is built around the ESP32, from the ESP32 family.
How big is the B.Tech-Final-Year-Project PCB?
The B.Tech-Final-Year-Project measures 155 × 106 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the B.Tech-Final-Year-Project?
22 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the B.Tech-Final-Year-Project design files?
From the harris8099/B.Tech-Final-Year-Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the B.Tech-Final-Year-Project design in my own project?
The repository has no license, so all rights stay with harris8099. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the B.Tech-Final-Year-Project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k