Usbc power breakout
harrys-ds·usbc-power-breakout
About the Usbc power breakout
Usbc power breakout is an open source PCB design by harrys-ds, published on GitHub. It is a board, with 9 components from 7 distinct parts.
Other key parts include the AP2112K-3.3. By type, the board carries 3 resistors, 2 connectors, 2 capacitors, 1 IC and 1 diode.
It belongs with the dev boards & breakouts and power & battery designs in this gallery.
From the project
USB-C to 5V/3.3V breakout board. My first PCB, designed in KiCad.
A small breadboard-friendly board that takes power from any USB-C charger and provides regulated 5 V and 3.3 V outputs, with a power indicator LED. Designed in KiCad as my first PCB.
USB-C → (5 V rail) → LED indicator └──→ AP2112K LDO → (3.3 V rail) Both rails + GND → pin header
- Making a clean power supply - starting with "USBCReceptaclePowerOnly6P" - VBUS: The 5v coming from charger - GND: Ground - CC1, CC2: Handshake pins - SHIELD: metal shell of connector.
Main components on the Usbc power breakout
Usbc power breakout bill of materials (BOM)
9 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | J1 | |
| 1 | Conn_01x03 | J2 | |
| 1 | LED | D1 | |
| 2 | 1u | C1, C2 | |
| 2 | 5.1k | R1, R2 | |
| 1 | 1k | R3 |
Usbc power breakout design files
The KiCad project lives in the harrys-ds/usbc-power-breakout repository on GitHub; these links point at the commit this page was built from.
- Schematicusbc-power-breakout.kicad_sch
- BOMREADME.md
Usbc power breakout: common questions
How many components are on the Usbc power breakout?
9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usbc power breakout design files?
From the harrys-ds/usbc-power-breakout repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Usbc power breakout design in my own project?
The repository has no license, so all rights stay with harrys-ds. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k