Class D amplifier
Harsha-2104·Class_D_amplifier·Class_D_amp/Class_D_amp.kicad_pcb
About the Class D amplifier PCB
Class D amplifier is an open source PCB design by Harsha-2104, published on GitHub. It is a 2-layer board measuring 69 × 54 mm, with 11 components from 9 distinct parts.
Other key parts include the AD8021AR. By type, the board carries 3 ICs, 3 resistors, 2 connectors, 2 capacitors and 1 inductor.
It belongs with the audio designs in this gallery.
From the project
This repo is internship task given by vicharak LLP.
The goal of this project was to design and simulate a high-efficiency Class-D audio amplifier using discrete components — avoiding custom Class-D amplifier ICs. My approach was to build the amplifier in two stages:
1. PWM Signal Generator: Creates a Pulse Width Modulated (PWM) signal that encodes the audio input with a triangular wave. 2. Low-Pass Output Filter: Demodulates the PWM signal, removing high-frequency noise to recover the amplified audio.

Main components on the Class D amplifier
Class D amplifier bill of materials (BOM)
11 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | AD8021AR | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3 |
| 1 | Conn_01x02_Pin | PinSocket_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_01x01_Pin | PinHeader_1x01_P2.00mm_Vertical | J2 |
| 1 | 90u | L_Axial_L12.8mm_D5.8mm_P20.32mm_Horizontal_Fastron_HBCC | L1 |
| 1 | 1n | C_Disc_D8.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 0.7u | C_Radial_D8.0mm_H11.5mm_P3.50mm | C2 |
| 1 | 1.5k | R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R1 |
| 1 | 690 | R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R2 |
| 1 | 1k | R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R3 |
Class D amplifier design files
The KiCad project lives in the Harsha-2104/Class_D_amplifier repository on GitHub; these links point at the commit this page was built from.
Class D amplifier: common questions
How big is the Class D amplifier PCB?
The Class D amplifier measures 69 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Class D amplifier?
11 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Class D amplifier design files?
From the Harsha-2104/Class_D_amplifier repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Class D amplifier design in my own project?
The repository has no license, so all rights stay with Harsha-2104. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687