Engine monitoring unit
Harshavar8jdm·engine-monitoring-unit
About the Engine monitoring unit PCB
Engine monitoring unit is an open source STM32 PCB design by Harshavar8jdm, published on GitHub. It is a 4-layer board measuring 70 × 50 mm, with 63 components from 35 distinct parts.
Its main chip is the STM32F411CEU6, from the STM32 family. Other key parts include the LMR16006XDDCR. By type, the board carries 20 capacitors, 20 resistors, 7 connectors, 7 diodes, 3 switches and 2 ICs.
It belongs with the displays & leds, power & battery and sensors designs in this gallery.
From the project
An open-source, automotive-grade Engine Monitoring Unit (EMU) designed to bring real-time engine telemetry and diagnostics to air-cooled single-cylinder motorcycles (such as the Hero Passion Plus) that lack factory instrumentation.
An open-source, automotive-grade Engine Monitoring Unit (EMU) designed to bring real-time engine telemetry and diagnostics to air-cooled single-cylinder motorcycles (such as the Hero Passion Plus) that lack factory instrumentation.
Powered by an STM32F411CEU6 ARM Cortex-M4 microcontroller, this unit captures vital thermal, electrical, and rotational parameters and displays them on a handlebar-mounted OLED screen—giving riders full visibility over engine health during long highway cruises and touring trips.

Main components on the Engine monitoring unit
Engine monitoring unit bill of materials (BOM)
63 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMR16006XDDCR | SOT95P280X110-6N | U1 |
| 1 | STM32F411CEU6 | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | HSE | CRYSTAL-SMD_4P-L3_2-W2_5-BL_0132M4-8_000F16DTNJL_C19674293 | Y1 |
| 1 | LSE | CRYSTAL-SMD_L3_2-W1_5-1_3131M32768DT06LL_C5221300 | Y2 |
| 1 | SW Debug | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Supply | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J2 |
| 1 | Oil Temperature | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J3 |
| 1 | Air Temperature | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J4 |
| 1 | Wheel Speed | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J5 |
| 1 | Inductive Sensor Wire | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J6 |
| 1 | SW Debug | PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | KEY | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | BOOT | SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | RST | SW_Push_SPST_NO_Alps_SKRK | SW3 |
| 1 | LED_USER | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LED_PWR | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | D_Schottky | POWERDI-123_L2_8-W1_8-LS3_7-RD-1_SS14FP_C894423 | D3 |
| 1 | CD0603-S0180 | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 2 | CD0603-B0130R | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5, D6 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CD0603-Z3V3 | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | 6.8uH | IND-SMD_L4_0-W4_0_NRS4018T_NRS4018T6R8MDGJ_C222881 | L1 |
| 11 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4, C5, C6, C7, C8, C10 +3 |
| 3 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C11, C17 |
| 2 | 24pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C12 |
| 1 | 2.2uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 2 | 6.8pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C16 |
| 1 | 100uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20 |
| 2 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 8 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R5, R9, R14, R15, R16, R17 |
| 1 | 100K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 33.2K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 5 | 2.2K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R10, R11, R19, R20 |
| 2 | 2K2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R18 |
| 1 | 4K7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
Engine monitoring unit design files
The KiCad project lives in the Harshavar8jdm/engine-monitoring-unit repository on GitHub; these links point at the commit this page was built from.
Engine monitoring unit: common questions
What microcontroller does the Engine monitoring unit use?
The Engine monitoring unit is built around the STM32F411CEU6, from the STM32 family.
How big is the Engine monitoring unit PCB?
The Engine monitoring unit measures 70 × 50 mm, has 4 copper layers and is 0.19 mm thick.
How many components are on the Engine monitoring unit?
63 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Engine monitoring unit design files?
From the Harshavar8jdm/engine-monitoring-unit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Engine monitoring unit design in my own project?
The repository has no license, so all rights stay with Harshavar8jdm. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Engine monitoring unit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k