HardLabs

HACKPAD

Hasona57·HACKPAD·PCB/HACKPAD.kicad_pcb

HACKPAD PCB layout, top view — open source RP2040/RP2350 board by Hasona57

About the HACKPAD PCB

HACKPAD is an open source RP2040/RP2350 PCB design by Hasona57, published on GitHub. It is a 2-layer board measuring 44.6 × 38.1 mm, with 7 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 switches, 2 diodes and 1 IC.

From the project

This macropad uses KMK firmware based on CircuitPython. Simply copy main.py into the root of your XIAO RP2040 CircuitPython drive.

This macropad uses KMK firmware based on CircuitPython. Simply copy main.py into the root of your XIAO RP2040 CircuitPython drive.

HACKPAD/ ├── CAD/ │ └── HACKPAD.step ├── PCB/ │ ├── HACKPAD.kicadpcb │ ├── HACKPAD.kicadsch │ └── HACKPAD.kicad_pro ├── Firmware/ │ └── main.py ├── production/ │ ├── gerbers.zip │ ├── Top.STEP │ ├── Bottom.STEP │ └── firmware.uf2 └── README.md

HACKPAD, from the project README
From the project README

Main components on the HACKPAD

XIAO-RP2040-DIP

HACKPAD bill of materials (BOM)

7 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
4
SW_Push
SW1, SW2, SW3, SW4
2
SK6812MINI
D1, D2

HACKPAD design files

The KiCad project lives in the Hasona57/HACKPAD repository on GitHub; these links point at the commit this page was built from.

HACKPAD: common questions

What microcontroller does the HACKPAD use?

The HACKPAD is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the HACKPAD PCB?

The HACKPAD measures 44.6 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HACKPAD?

7 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HACKPAD design files?

From the Hasona57/HACKPAD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HACKPAD design in my own project?

The repository has no license, so all rights stay with Hasona57. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HACKPAD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in HACKPAD

Similar boards