SH-ESP32 Proto Top Hat
About the SH-ESP32 Proto Top Hat
SH-ESP32 Proto Top Hat is an open source PCB design by hatlabs, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 83 × 55.5 mm, with 9 components from 4 distinct parts.
It belongs with the dev boards & breakouts, rf & radio and sensors designs in this gallery.
From the project
Sailor Hat for ESP32 hardware
This repository contains the Sailor Hat for ESP32 (SH-ESP32) hardware design. SH-ESP32 is a powerful microcontroller development board designed for marine environments.
Special emphasis has been placed on electrical compliance: the board can handle most power surges ever present on an automotive or marine 12V or 24V power system. Equally importantly, the inputs and outputs have protection for electrostatic discharges (static electricity), and are designed to not produce electromagnetic emissions (disturb other sensitive devices such as VHF radios or GPS antennas), and to be protected against…
SH-ESP32 Proto Top Hat bill of materials (BOM)
9 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J301 |
| 1 | I2C | PinHeader_1x04_P2.54mm_Vertical | J303 |
| 1 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J306 |
| 6 | Conn_01x01_Male | ProtoPad-Drill1mm | P301, P302, P303, P304, P305, P306 |
SH-ESP32 Proto Top Hat design files
The KiCad project lives in the hatlabs/SH-ESP32-hardware repository on GitHub; these links point at the commit this page was built from.
SH-ESP32 Proto Top Hat: common questions
How big is the SH-ESP32 Proto Top Hat?
The SH-ESP32 Proto Top Hat measures 83 × 55.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SH-ESP32 Proto Top Hat?
9 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the SH-ESP32 Proto Top Hat design files?
From the hatlabs/SH-ESP32-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SH-ESP32 Proto Top Hat design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which hatlabs chose for the repository.
More boards in SH-ESP32-hardware
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
Breakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k