22 open source boards using the TSOP38238
Real designs built with the TSOP38238, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TV-B-Gone kit V2
maltman23
59.9 × 49.3 mm16 parts2LNo license89AVR/Arduino
Atmega32u4 hub pcb 1 2
Accessible-AAC
71.9 × 58.4 mm65 parts2LNo license3ESP32
Watch2 (copy)
atctwo
48.5 × 42.9 mm70 partsMIT2AVR/Arduino
Pi top Glimmer
uChip
65 × 56 mm102 parts4LNo license1ESP32
DSH-DEX
DSHSTUDIOS
47 × 46.5 mm58 parts2LNo license1ESP32
Kraky
thesh4dows
94.5 × 98.5 mm38 parts4LGPL-3.01STM32
Ir remote
danngreen
127 × 53.5 mm99 parts2LNo license0ESP8266
Badge bsides v0.7
dodgymike
99.6 × 57.9 mm66 parts2LNo license0AVR/Arduino
Avr ac400
julian7
105.4 × 76.2 mm57 parts2LCC-BY-4.00PIC
UBMP4.1
mirobotech
88.9 × 38.1 mm56 parts2LMIT0ESP32
Curupira diy
acacio90
100 × 100 mm31 parts2LNo license0M5 ir blaster
haya1010
52 × 40 mm19 parts2LNo license0AVR/Arduino
Atmega32u4 hub pcb 1 3
Accessible-AAC
71.9 × 58.4 mm65 parts2LNo license3ESP32
Watch2-board outline
atctwo
48.6 × 42.9 mm68 partsMIT2Control board
Alex-Wolfe
256.9 × 96.2 mm165 parts4LNo license1ESP8266
Paper badges
dodgymike
99.6 × 57.9 mm66 parts2LNo license0ESP32
Watch2
atctwo
48.6 × 35.6 mm66 partsMIT2ESP8266
Badge dc24-with lcd all smd and breakout
dodgymike
87.3 × 43 mm32 parts2LNo license0ESP32
Watch2-without led tab
atctwo
48.6 × 35.6 mm66 partsMIT2ESP8266
Badge dc24-with lcd
dodgymike
82.2 × 49.4 mm31 parts2LNo license0ESP8266
Badge dc24-with lcd all smd
dodgymike
87.3 × 43 mm31 parts2LNo license0ESP8266
Badge dc24
dodgymike
62.2 × 46.4 mm22 parts2LNo license0
How designs wire the TSOP38238
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the TSOP38238 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_2pin 2 | Connected to: GND 77% · a signal 15% | — |
| VS_3pin 3 | Connected to: 3.3V 69% · a signal 31% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TV-B-Gone kit V2 by maltman23, Atmega32u4 hub pcb 1 2 by Accessible-AAC, Watch2 by atctwo and Control board by Alex-Wolfe.
The TSOP38238 in open source designs
The gallery holds 22 open source boards using the TSOP38238 from 13 GitHub repositories; a typical one measures about 77 × 49.3 mm and carries around 62 components.
83% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.
The most starred is TV-B-Gone kit V2 by maltman23.
Microcontrollers on boards using the TSOP38238
What boards using the TSOP38238 are built for
TSOP38238: common questions
Where can I find a TSOP38238 reference design?
Each of the 22 boards on this page is a real design using the TSOP38238. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TSOP38238 use?
Most are built on ESP32 (7), ESP8266 (6), AVR/Arduino (4) and PIC (1).
How big is a typical board using the TSOP38238?
The median is 77 × 49.3 mm, and 83% are two-layer designs.
What is the most popular open source board using the TSOP38238?
By GitHub stars, TV-B-Gone kit V2 by maltman23, with 89 stars.
Can I simulate one of these boards using the TSOP38238 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.