Holographic-Clock-Display
he1ias·Holographic-Clock-Display·KiCad Files/Hologram.kicad_pcb
About the Holographic-Clock-Display PCB
Holographic-Clock-Display is an open source RP2040/RP2350 PCB design by he1ias, published on GitHub. It is a 2-layer board measuring 90 × 90 mm, with 7 components from 4 distinct parts.
Its main chip is the XIAO-RP2040-SMD, from the RP2040/RP2350 family. Other key parts include the HS96S01A. By type, the board carries 4 ICs and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
A Holographic Clock Display for your bedside table, powered by the ESP32. Using the Pepper's Ghost visual effect, this display appears to 'float' in mid-air.
A Holographic Clock Display for your bedside table, powered by the ESP32. Using the Pepper's Ghost visual effect, this display appears to 'float' in mid-air.
Comes with a wide range of pre-programmed clock-faces, visual effects, and relaxing animations. Works best when used in a dark room.
It can display a wide variety of clock faces & relaxing visual effects. The Pepper's Ghost 'illusion' gives the images a 3D effect. Simply connected to the ESP32 via a USB-C cable. The display comes with a builtin effect selection button and brightness knob for ease of use.

Main components on the Holographic-Clock-Display
Holographic-Clock-Display bill of materials (BOM)
7 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | HS96S01A HS(汉昇) | LCD-TH_HS96S01A | U1, U2, U3, U4 |
| 1 | RK10J11E0034 ALPSALPINE(阿尔卑斯阿尔派) | RES-TH_RK10J12E0A0A | P1 |
| 1 | F2J0502210 SAMZO(三佐) | SW-TH_3P-L4.5-W5.0-P3.00-LS1.9 | B1 |
| 1 | XIAO-RP2040-SMD | XIAO-RP2040-DIP | ESP1 |
Holographic-Clock-Display design files
The KiCad project lives in the he1ias/Holographic-Clock-Display repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad Files/Hologram.kicad_pcb
- SchematicKiCad Files/Hologram.kicad_sch
Holographic-Clock-Display: common questions
What microcontroller does the Holographic-Clock-Display use?
The Holographic-Clock-Display is built around the XIAO-RP2040-SMD, from the RP2040/RP2350 family.
How big is the Holographic-Clock-Display PCB?
The Holographic-Clock-Display measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Holographic-Clock-Display?
7 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Holographic-Clock-Display design files?
From the he1ias/Holographic-Clock-Display repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Holographic-Clock-Display design in my own project?
The repository has no license, so all rights stay with he1ias. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Holographic-Clock-Display without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k