USB-to-UART-PCB-Design

Heman-hk·USB-to-UART-PCB-Design

USB-to-UART-PCB-Design layout, top view — open source board by Heman-hk

About the USB-to-UART-PCB-Design

USB-to-UART-PCB-Design is an open source PCB design by Heman-hk, published on GitHub. It is a 2-layer board measuring 37 × 14 mm, with 19 components from 9 distinct parts.

Other key parts include the CP2102N-Axx-xQFN28. By type, the board carries 7 resistors, 5 diodes, 4 capacitors, 2 connectors and 1 IC.

It belongs with the usb & debug tools designs in this gallery.

From the project

USB to UART Converter – Project A practical USB-to-serial bridge interface featuring the CP2102N QFN-28 and a USB Type-C port. Designed using KiCad, this board helps developers and hobbyists communicate with microcontrollers, loggers, and other serial-enabled devices via a reliab

USB to UART Converter – Project A practical USB-to-serial bridge interface featuring the CP2102N QFN-28 and a USB Type-C port. Designed using KiCad, this board helps developers and hobbyists communicate with microcontrollers, loggers, and other serial-enabled devices via a reliable USB interface.

- USB 2.0 Type-C receptacle with proper CC pull-down resistors - High-quality UART bridge using Silicon Labs CP2102N - ESD protection on all high-speed lines - Compact 2-layer PCB design for easy prototyping - LED indicators for USB power and TX activity - Breakout for TX, RX, and additional control…

Main components on the USB-to-UART-PCB-Design

USB-to-UART-PCB-Design bill of materials (BOM)

19 components, 9 distinct parts.

QtyPartRefs
1
CP2102N-Axx-xQFN28
U1
1
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x05_Pin
J2
3
LESD5D5.0CT1G
D1, D2, D3
2
LED
D6, D7
4
100nF
C1, C2, C3, C4
2
5.1K
R1, R2
1
10K
R3
4
1K
R4, R5, R6, R7

USB-to-UART-PCB-Design design files

The KiCad project lives in the Heman-hk/USB-to-UART-PCB-Design repository on GitHub; these links point at the commit this page was built from.

USB-to-UART-PCB-Design: common questions

How big is the USB-to-UART-PCB-Design?

The USB-to-UART-PCB-Design measures 37 × 14 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USB-to-UART-PCB-Design?

19 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the USB-to-UART-PCB-Design design files?

From the Heman-hk/USB-to-UART-PCB-Design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the USB-to-UART-PCB-Design design in my own project?

The repository has no license, so all rights stay with Heman-hk. Use it as a reference, and ask the author before reusing the design.

Similar boards