Solar car dcdc
henrysg1·solar-car-dcdc·DCDC Project/DCDCPCB.kicad_pcb
About the Solar car dcdc PCB
Solar car dcdc is an open source PCB design by henrysg1, published on GitHub under the MIT license. It is a 2-layer board measuring 144 × 80 mm, with 31 components from 20 distinct parts.
By type, the board carries 6 resistors, 5 fuses, 4 connectors, 4 inductors, 4 capacitors and 3 diodes.
It belongs with the power & battery designs in this gallery.
From the project
This repository contains the KiCAD project for the University of Nottingham's solar race car DCDC converter.
This repository contains the design files for a DC-DC converter used in the University of Nottingham's solar race car. The converter steps down the battery voltage from 135V to 12V, which is essential for powering various low-voltage components in the vehicle.
- Input Voltage: 135V - Output Voltage: 12V - Output Current: Up to 50A - Efficiency: > 90% - Protection: Overvoltage, Overcurrent, Thermal Shutdown - Compact PCB Design
Solar car dcdc bill of materials (BOM)
31 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | IPL1 | SAMTEC_IPL1-102-01-L-S-K | J1, J2, J3 |
| 1 | IPL1 MPT-04 | SAMTEC_MPT-04-6.30-XX-X-V | J4 |
| 2 | 5A | PCB_Fuse_Holder_MC_69_0013 | F1, F2 |
| 1 | 3555-2 1A | D_1206_3216Metric | F3 |
| 2 | 25A | 3568 | F4, F5 |
| 1 | RELAY_SPDT | Micro_Relay_V23086C1001A403 | K1 |
| 2 | DCM3623TA5N13B4T00 | DCM3623TA5N13B4T00Heatsink | PS1, PS2 |
| 2 | 250k | TS63Y254KT20 | RV1, RV2 |
| 1 | D_SOD-123 | D_SOD-123 | D1 |
| 1 | LTST-C193KRKT-5A | LED_0603_1608Metric | D2 |
| 1 | D_SCHOTTKY_X2_KCOM_AKA LTST-C193KRKT-5A | LED_0603_1608Metric | D3 |
| 2 | 1UH 1uH | 1uHInductor | L1, L2 |
| 2 | 0.15UH 0.15uH | 0.15UInductor | L3, L4 |
| 2 | 2UF 2uF | C_2220_5650Metric | C1, C2 |
| 2 | 1000UF 1000uF | CAP_EEVTG1E102M | C3, C4 |
| 2 | 1 | R_1206_3216Metric | R1, R2 |
| 1 | 470 510 | R_0603_1608Metric | R3 |
| 1 | 50K 50k | R_0603_1608Metric | R4 |
| 1 | 301 510 | R_0603_1608Metric | R5 |
| 1 | 301 50k | R_0603_1608Metric | R6 |
Solar car dcdc design files
The KiCad project lives in the henrysg1/solar-car-dcdc repository on GitHub; these links point at the commit this page was built from.
Solar car dcdc: common questions
How big is the Solar car dcdc PCB?
The Solar car dcdc measures 144 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Solar car dcdc?
31 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Solar car dcdc design files?
From the henrysg1/solar-car-dcdc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Solar car dcdc design in my own project?
Yes, under the terms of its MIT license, which henrysg1 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k