Stm32 LORA TEMP PWM
Heorenmaru·Hardware·Stm32_LORA_TEMP_PWM/Stm32_LORA_TEMP_PWM.kicad_pcb
About the Stm32 LORA TEMP PWM PCB
Stm32 LORA TEMP PWM is an open source STM32 PCB design by Heorenmaru, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 55.3 × 35.9 mm, with 58 components from 20 distinct parts.
Its main chip is the STM32L151CBTx, from the STM32 family. Other key parts include the RFM95W-868S2, L78L33_SOT89 and XC6206PxxxMR. By type, the board carries 21 resistors, 12 diodes, 12 capacitors, 4 ICs, 3 inductors and 2 transistors.
It belongs with the rf & radio designs in this gallery.
Main components on the Stm32 LORA TEMP PWM
Stm32 LORA TEMP PWM bill of materials (BOM)
58 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L151CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | RFM95W-868S2 | HOPERF_RFM9XW_SMD | U2 |
| 1 | L78L33_SOT89 | SOT-89-3 | U4 |
| 1 | XC6206PxxxMR | SOT-23-3 | U5 |
| 2 | IRLML0030 | SOT-23 | Q2, Q3 |
| 1 | 32k | Crystal_SMD_SeikoEpson_MC146-4Pin_6.7x1.5mm_HandSoldering | Y1 |
| 1 | 12Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW1 |
| 12 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D7, D8, D9, D10, D11, D12, D13 +4 |
| 3 | blm21pg221 | L_1806_4516Metric_Pad1.45x1.90mm_HandSolder | FB1, FB2, FB3 |
| 2 | 7pf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 9pf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C7 |
| 2 | 47u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C8 |
| 1 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 3 | C | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11, C12 |
| 2 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 10 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R14, R15, R16, R17, R18 +2 |
| 9 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R9, R10, R11, R12, R13 +1 |
Stm32 LORA TEMP PWM design files
The KiCad project lives in the Heorenmaru/Hardware repository on GitHub; these links point at the commit this page was built from.
Stm32 LORA TEMP PWM: common questions
What microcontroller does the Stm32 LORA TEMP PWM use?
The Stm32 LORA TEMP PWM is built around the STM32L151CBTx, from the STM32 family.
How big is the Stm32 LORA TEMP PWM PCB?
The Stm32 LORA TEMP PWM measures 55.3 × 35.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32 LORA TEMP PWM?
58 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32 LORA TEMP PWM design files?
From the Heorenmaru/Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32 LORA TEMP PWM design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Heorenmaru chose for the repository.
Can I test firmware for the Stm32 LORA TEMP PWM without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Hardware
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k