HexMote

hephaestushex·HexMote·pcb/hexmote_pcb.kicad_pcb

HexMote PCB layout, top view — open source board by hephaestushex

About the HexMote PCB

HexMote is an open source PCB design by hephaestushex, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 90 × 40 mm, with 12 components from 6 distinct parts.

Other key parts include the Joystick. By type, the board carries 9 switches, 2 connectors and 1 IC.

It belongs with the sensors and iot & wireless designs in this gallery.

From the project

A wireless game controller with a built in IMU, allowing for motion controlled games. Uses the nRF52840

The schematic initially used a switch matrix, but falling back to direct pins proved better for pcb traces.

The PCB is 90x40mm, and has surfacemounted THT components through plugging holes with solder, and THT buttons and joysticks

The case is split up into 3 parts, one of the top shell, one of the bottom shell, and one of the buttons all together

The PCB mounts on printed standoffs with heatset inserts placed within them, and the m3x6 screws directly into the top shell, through the pcb, and into the insert

HexMote, from the project README
From the project README

Main components on the HexMote

HexMote bill of materials (BOM)

12 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Joystick
U2
1
LiPo Cell
J2
1
CONN_01X10_PIN
Conn_01x10_Pin
J3
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6
2
SW_Push
SW7, SW8
1
SW_SPDT
SW10

HexMote design files

The KiCad project lives in the hephaestushex/HexMote repository on GitHub; these links point at the commit this page was built from.

HexMote: common questions

How big is the HexMote PCB?

The HexMote measures 90 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HexMote?

12 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HexMote design files?

From the hephaestushex/HexMote repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HexMote design in my own project?

Yes, under the terms of its GPL-3.0 license, which hephaestushex chose for the repository.

Similar boards