HardLabs

Pico pingpong

heyitsmeyo·pico-pingpong·ping pong/ping/ping.kicad_pcb

Pico pingpong PCB layout, top view — open source RP2040/RP2350 board by heyitsmeyo

About the Pico pingpong PCB

Pico pingpong is an open source RP2040/RP2350 PCB design by heyitsmeyo, published on GitHub. It is a 2-layer board measuring 117 × 76 mm, with 10 components from 7 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 5 switches, 1 IC, 1 connector, 1 buzzer, 1 LED and 1 diode.

From the project

this is a python code to run a ping pong game on a raspberry pi pico with the circuitpython firmware installed in .....

this is a python code to run a ping pong game on a raspberry pi pico with the circuitpython firmware installed in .....

you need : a raspberry pi pico , breadboard , buzzer , arduino i2c display ,

first of all , download the circuitpython firmware from here :

copy also the required libraries like busio ....etc

you alos need an IDE , download the thony ide from here :

Pico pingpong, from the project README
From the project README

Main components on the Pico pingpong

Pico

Pico pingpong bill of materials (BOM)

10 components, 7 distinct parts.

QtyPartRefs
1
Pico
U1
1
Screw_Terminal_01x02
J1
1
Buzzer
BZ1
4
SW_Push
SW1, SW2, SW3, SW4
1
SW_Wuerth_450301014042
SW6
1
SSD1306
Brd1
1
D_Schottky
D1

Pico pingpong design files

The KiCad project lives in the heyitsmeyo/pico-pingpong repository on GitHub; these links point at the commit this page was built from.

Pico pingpong: common questions

What microcontroller does the Pico pingpong use?

The Pico pingpong is built around the Pico, from the RP2040/RP2350 family.

How big is the Pico pingpong PCB?

The Pico pingpong measures 117 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pico pingpong?

10 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pico pingpong design files?

From the heyitsmeyo/pico-pingpong repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pico pingpong design in my own project?

The repository has no license, so all rights stay with heyitsmeyo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pico pingpong without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards