HardLabs

Arduino nano kicad design

Hirusha785·arduino-nano-kicad-design

Arduino nano kicad design PCB layout, top view — open source AVR/Arduino board by Hirusha785

About the Arduino nano kicad design PCB

Arduino nano kicad design is an open source AVR/Arduino PCB design by Hirusha785, published on GitHub. It is a 4-layer board measuring 45.7 × 19.5 mm, with 33 components from 20 distinct parts.

Its main chip is the ATmega328P-M, from the AVR/Arduino family. Other key parts include the LM1117MP-5.0 and FT232RL. By type, the board carries 10 capacitors, 7 resistors, 5 connectors, 5 diodes, 3 ICs and 1 crystal.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

⚙️ Arduino Nano-compatible development board designed in KiCad for the Mastering KiCad Specialization final project. Includes schematic, PCB layout, 3D renders, BOM, and fabrication-ready files for manufacturing. 🚀📐

A custom Arduino Nano-compatible development board designed in KiCad as the final project for the Mastering KiCad Specialization course.

This project demonstrates the complete PCB design workflow, including schematic design, PCB layout, component placement, routing, silkscreen labeling, 3D visualization, BOM preparation, and fabrication-ready file generation.

Arduino nano kicad design, from the project README
From the project README

Main components on the Arduino nano kicad design

ATmega328P-MLM1117MP-5.0FT232RL

Arduino nano kicad design bill of materials (BOM)

33 components, 20 distinct parts.

QtyPartRefs
1
ATmega328P-M
U1
1
LM1117MP-5.0
U2
1
FT232RL
U3
1
16 MHz
Y1
1
USB_B_Mini
J1
2
~
J2, J4
1
ICSP
J3
1
Conn_01x03_Pin
J5
1
0603
F1
1
~
SW1
1
Yellow
D1
2
Green
D2, D5
1
Diode
D3
1
Red
D4
4
1 uF
C1, C2, C5, C6
4
100 nF
C3, C7, C8, C10
1
4u7_16V
C4
1
4u7_16V
C9
3
1 K
R1, R6, R7
4
1k
R2, R3, R4, R5

Arduino nano kicad design design files

The KiCad project lives in the Hirusha785/arduino-nano-kicad-design repository on GitHub; these links point at the commit this page was built from.

Arduino nano kicad design: common questions

What microcontroller does the Arduino nano kicad design use?

The Arduino nano kicad design is built around the ATmega328P-M, from the AVR/Arduino family.

How big is the Arduino nano kicad design PCB?

The Arduino nano kicad design measures 45.7 × 19.5 mm, has 4 copper layers and is 1.326 mm thick.

How many components are on the Arduino nano kicad design?

33 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino nano kicad design design files?

From the Hirusha785/arduino-nano-kicad-design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Arduino nano kicad design design in my own project?

The repository has no license, so all rights stay with Hirusha785. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arduino nano kicad design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards