PowerControl PCM V0.1 Power
About the PowerControl PCM V0.1 Power PCB
PowerControl PCM V0.1 Power is an open source PCB design by hkustenterprize, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 44 × 60 mm, with 74 components from 22 distinct parts.
Other key parts include the UCC27201A and UCC27211. By type, the board carries 28 capacitors, 14 resistors, 11 connectors, 7 diodes, 6 transistors and 3 ICs.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
大家好呀，RM2025的超级电容和无线充电的开源报告终于写完了，这套前前后后做了三四个月，最后在用在了所有上场的车上（无线充只有步兵和英雄有），场上没出过什么问题，很稳定。硬件上与上一代开源没有很大变动，主要的改动是超级电容换了峰值电流内环，然后与无线充电进行了融合，放到了一个MCU上去控。虽然有一些缺陷和不足但是总体效果还可以，希望可以帮到大家。如果大家有任何有疑问或者发现有问题的地方欢迎随时联系！
大家好呀，RM2025的超级电容和无线充电的开源报告终于写完了，这套前前后后做了三四个月，最后在用在了所有上场的车上（无线充只有步兵和英雄有），场上没出过什么问题，很稳定。硬件上与上一代开源没有很大变动，主要的改动是超级电容换了峰值电流内环，然后与无线充电进行了融合，放到了一个MCU上去控。虽然有一些缺陷和不足但是总体效果还可以，希望可以帮到大家。如果大家有任何有疑问或者发现有问题的地方欢迎随时联系！
发射端/功控板硬件、功控板代码：xzm > 联系方式：微信 xianziming0531，邮箱 zxianaa@connect.ust.hk
发射端代码：zzy > 联系方式：微信 baoqi-zhong，邮箱 zzhongas@connect.ust.hk
因为峰值电流调试起来比较复杂，也比较麻烦，所以大家有需要还是建议优先参考我们24年/23年的开源，这两版电容都是可以保证稳定的，24年的开源基本上板子做出了烧个代码就能用了。
Main components on the PowerControl PCM V0.1 Power
PowerControl PCM V0.1 Power bill of materials (BOM)
74 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UCC27201A | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 2 | UCC27211 | SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 6 | BSC070N10N | TDSON-8-1 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | XT30-F | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J2 |
| 7 | Conn_M | PinHeader_2x02_P2.00mm_Vertical_SMD | J3, J7, J12, J13, J14, J15, J16 |
| 3 | XT30-M | AMASS_XT30U-M_1x02_P5.0mm_Vertical | J4, J5, J6 |
| 2 | 30A | Fuse_Littelfuse-NANO2-451_453 | F1, F2 |
| 1 | 5A | Fuse_Littelfuse-NANO2-451_453 | F3 |
| 1 | SMCJ33A | D_SMC | D1 |
| 2 | BZT52C11S | D_SOD-323_HandSoldering | D2, D10 |
| 2 | SMCJ28A | D_SMC | D5, D6 |
| 2 | BAV99 | SOT-23 | D9, D11 |
| 1 | L | L_Wuerth_HCI-1040 | L2 |
| 1 | 10UH 10uH | L_VER2923 | L5 |
| 2 | 1n | C_0603_1608Metric | C1, C2 |
| 13 | 10U 10u | C_1206_3216Metric | C3, C4, C6, C15, C16, C17, C18, C19 +5 |
| 5 | 4U7 4u7 | C_0603_1608Metric | C5, C12, C25, C27, C28 |
| 3 | 100N 100n | C_0603_1608Metric | C7, C8, C26 |
| 5 | 220U 220u | C_D8.0mm_P3.50mm | C11, C13, C14, C23, C24 |
| 6 | R_Gate | R_0603_1608Metric | R1, R2, R4, R5, R6, R7 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 2MR 2mR | R_2512_6332Metric | R3, R8, R9, R10 |
| 4 | 4K7 4k7 | R_0603_1608Metric | R11, R12, R13, R14 |
PowerControl PCM V0.1 Power design files
The KiCad project lives in the hkustenterprize/RM2025-PowerControlBoard-WirelessCharging repository on GitHub; these links point at the commit this page was built from.
PowerControl PCM V0.1 Power: common questions
How big is the PowerControl PCM V0.1 Power PCB?
The PowerControl PCM V0.1 Power measures 44 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PowerControl PCM V0.1 Power?
74 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PowerControl PCM V0.1 Power design files?
From the hkustenterprize/RM2025-PowerControlBoard-WirelessCharging repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PowerControl PCM V0.1 Power design in my own project?
Yes, under the terms of its GPL-3.0 license, which hkustenterprize chose for the repository.
More boards in RM2025-PowerControlBoard-WirelessCharging
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k