Ch552t tinypad
HongoMCC·ch552t_tinypad·ch552t_tinypad_board/ch552t_tinypad_board.kicad_pcb
About the Ch552t tinypad PCB
Ch552t tinypad is an open source WCH CH32/CH55x PCB design by HongoMCC, published on GitHub under the MIT license. It is a 2-layer board measuring 91 × 55 mm, with 17 components from 9 distinct parts.
Its main chip is the CH552T, from the WCH CH32/CH55x family. By type, the board carries 7 switches, 4 resistors, 2 connectors, 2 capacitors, 1 IC and 1 diode.
It belongs with the keyboards designs in this gallery.
From the project
6 key macropad with USB microcontroller CH552T
6 key macropad with USB microcontroller CH552T
- R1: 330 - R2: 10k - R3, R4: 5.1k - C1, C2: 0.1uF - U1: CH552T - J1: PinHeader 2x10 - J2: USB-C receptacle - U1: CH552T - SW1~SW6: CherryMX compatible keyswitch - SW7: SMD tactile switch
Main components on the Ch552t tinypad
Ch552t tinypad bill of materials (BOM)
17 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH552T | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 6 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | SW_Push | SW_SPST_TVAF06_A020B_R | SW7 |
| 1 | LED | LED_D3.0mm | D1 |
| 2 | 0.1u | C_SMD_0603_1608_Disc_DualUse | C1, C2 |
| 2 | 10k | R_SMD_0603_1608_THT_DIN0207_DualUse | R1, R2 |
| 2 | 5.1k | R_SMD_0603_1608_THT_DIN0207_DualUse | R3, R4 |
Ch552t tinypad design files
The KiCad project lives in the HongoMCC/ch552t_tinypad repository on GitHub; these links point at the commit this page was built from.
Ch552t tinypad: common questions
What microcontroller does the Ch552t tinypad use?
The Ch552t tinypad is built around the CH552T, from the WCH CH32/CH55x family.
How big is the Ch552t tinypad PCB?
The Ch552t tinypad measures 91 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ch552t tinypad?
17 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ch552t tinypad design files?
From the HongoMCC/ch552t_tinypad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ch552t tinypad design in my own project?
Yes, under the terms of its MIT license, which HongoMCC chose for the repository.
Can I test firmware for the Ch552t tinypad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.
Similar boards
WCH CH32/CH55x
Ps2usb
rasteri
40 × 55 mm25 parts2LNo license428WCH CH32/CH55x
CH32X-48
rgoulter
224.6 × 74.2 mm112 parts2LNo license230WCH CH32/CH55x
CH552-48
rgoulter
224.6 × 74.2 mm107 parts2LNo license230WCH CH32/CH55x
CH32X-60-ANSI-Improved
rgoulter
285 × 94.2 mm149 parts2LNo license230WCH CH32/CH55x
CH32X-75
rgoulter
285 × 94.2 mm318 parts2LNo license230WCH CH32/CH55x
Webusb programmer rev6
laneboysrc
38 × 20 mm18 parts2LMIT87