16 open source boards using the CH552T

Real designs built with the CH552T, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the CH552T

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the CH552T connects to, and the resistors, capacitors and other passives placed on it.

  • The V33 pin has a decoupling capacitor on 11 of 14 designs, most often 100 nF (then 22 µF).
  • The VCC/VDD pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 10 µF).
  • The P3.6/UDP pin has a series resistor on 8 of 14 designs, most often 10 kΩ.
P3.6/UDPpin 14Connected to: A connector 64%
  • Series resistor on 57% · 10 kΩ (8)
GND/VSSpin 18Connected to: GND 100%
VCC/VDDpin 19Connected to: VCC 93%
  • Decoupling capacitor on 64% · 100 nF (10), 10 µF (1), 22 µF (1)
V33pin 20Connected to: 3.3V 50% · a signal 50%
  • Decoupling capacitor on 79% · 100 nF (12), 22 µF (2)

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Idawgz32 by ChrisChrisLoLo, SandKrux by sandman21vs, Taiko-Input by AnalogDragon and ToadsTempest by tikinson.

The CH552T in open source designs

The gallery holds 16 open source boards using the CH552T from 14 GitHub repositories; a typical one measures about 91 × 55 mm and carries around 41 components.

81% are two-layer designs, the rest use four layers or more, and 81% carry an open source license.

The most starred is Idawgz32 by ChrisChrisLoLo.

Microcontrollers on boards using the CH552T

What boards using the CH552T are built for

CH552T: common questions

Where can I find a CH552T reference design?

Each of the 16 boards on this page is a real design using the CH552T. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the CH552T V33 pin?

The V33 pin has a decoupling capacitor on 11 of 14 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 14 open source designs using the CH552T.

What decoupling capacitors do designs use on the CH552T VCC/VDD pin?

The VCC/VDD pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the CH552T.

What resistor goes on the CH552T P3.6/UDP pin?

The P3.6/UDP pin has a series resistor on 8 of 14 designs, most often 10 kΩ. Counted from the KiCad layouts of 14 open source designs using the CH552T.

What parts are used alongside the CH552T?

The USBLC6-2SC6, CH334U, FSUSB42MUX, TPS2552DBVR and XC6206P332MR-G appear in the most repositories here.

Which microcontrollers do boards using the CH552T use?

Most are built on WCH CH32/CH55x (15) and STM32 (1).

How big is a typical board using the CH552T?

The median is 91 × 55 mm, and 81% are two-layer designs.

What is the most popular open source board using the CH552T?

By GitHub stars, Idawgz32 by ChrisChrisLoLo, with 77 stars.

Can I simulate one of these boards using the CH552T before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part