Blind SleepyLoRa
About the Blind SleepyLoRa PCB
Blind SleepyLoRa is an open source PCB design by Hootie81, published on GitHub under the MIT license. It is a 2-layer board measuring 130.5 × 39.5 mm, with 12 components from 10 distinct parts.
By type, the board carries 4 ICs, 3 connectors, 2 capacitors, 1 switch and 1 resistor.
It belongs with the rf & radio designs in this gallery.
From the project
SleepyLoRa Binds, A LoRa based solution for low power actuation of plantation shutters
This folder contains all the electronics design files, schematics, PCB layouts, and bills of materials (BOM) for the SleepyLoRa Blinds System. The electronics are designed to be easy to assemble, cost-effective, and reliable for DIY smart blinds control.
Each device folder contains: - KiCad project files (.pro, .sch, .kicadpcb`, etc.) - Gerber files for PCB manufacturing - Device-specific BOM (bill of materials)
Blind SleepyLoRa bill of materials (BOM)
12 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | drv8833_module | U1 |
| 1 | ~ | WSL | U2 |
| 1 | ~ | Boost_module | U3 |
| 1 | ~ | RS485_3v3_module | U4 |
| 1 | Conn_01x04_Socket | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1 |
| 2 | Conn_01x04_Socket | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2, J3 |
| 1 | R_Potentiometer | linear_pot_128mm | RV1 |
| 1 | SW_Omron_B3FS | SW_PUSH_6mm_H4.3mm | SW1 |
| 2 | C | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 10K | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
Blind SleepyLoRa design files
The KiCad project lives in the Hootie81/SleepyLoRa repository on GitHub; these links point at the commit this page was built from.
Blind SleepyLoRa: common questions
How big is the Blind SleepyLoRa PCB?
The Blind SleepyLoRa measures 130.5 × 39.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Blind SleepyLoRa?
12 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Blind SleepyLoRa design files?
From the Hootie81/SleepyLoRa repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Blind SleepyLoRa design in my own project?
Yes, under the terms of its MIT license, which Hootie81 chose for the repository.
More boards in SleepyLoRa
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568
GoodPocketWatch
75.2 × 101.2 mm56 parts2LNo license568
Goodwatch31
25.6 × 27.6 mm23 parts2LNo license568