6 open source boards using the R7FA4M1AB3CFM#AA0

Real designs built with the R7FA4M1AB3CFM#AA0, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The R7FA4M1AB3CFM#AA0 in open source designs

The gallery holds 6 open source boards using the R7FA4M1AB3CFM#AA0 from 4 GitHub repositories; a typical one measures about 66.5 × 53.3 mm and carries around 76 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Arduino UNO R4 WiFi by sabogalc.

Parts used alongside the R7FA4M1AB3CFM#AA0

Microcontrollers on boards using the R7FA4M1AB3CFM#AA0

What boards using the R7FA4M1AB3CFM#AA0 are built for

R7FA4M1AB3CFM#AA0: common questions

Where can I find a R7FA4M1AB3CFM#AA0 reference design?

Each of the 6 boards on this page is a real design using the R7FA4M1AB3CFM#AA0. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the R7FA4M1AB3CFM#AA0 use?

Most are built on Renesas (3), AVR/Arduino (2) and ESP32 (1).

How big is a typical board using the R7FA4M1AB3CFM#AA0?

The median is 66.5 × 53.3 mm, and 50% are two-layer designs.

What is the most popular open source board using the R7FA4M1AB3CFM#AA0?

By GitHub stars, Arduino UNO R4 WiFi by sabogalc, with 93 stars.

Can I simulate one of these boards using the R7FA4M1AB3CFM#AA0 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part