Indicator rev 2
About the Indicator rev 2 PCB
Indicator rev 2 is an open source PCB design by hpvdt, published on GitHub. It is a 2-layer board measuring 55 × 56 mm, with 23 components from 8 distinct parts.
Other key parts include the TCA6408ARSVR and TLV70033DCKR. By type, the board carries 10 resistors, 7 LEDs, 2 ICs, 2 capacitors, 1 connector and 1 buzzer.
From the project
General purpose modules for handling wing duties
The designs for the wing module reside here. The module is an evolution of two separate boards on Falcon: the distributed voltage regulators (servoregulator), and the spar load sensing boards (sparsensor). As such, their design files are included in this repository for reference in addition to the actual wing module design files.
All designs were made in KiCad, version 9.0 as of writing.
Main components on the Indicator rev 2
Indicator rev 2 bill of materials (BOM)
23 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCA6408ARSVR | QFN40P180X260X55-16N | U1 |
| 1 | TLV70033DCKR | SOT65P210X110-5N | U2 |
| 1 | CONN_01X04 Conn_01x04 | JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J1 |
| 1 | KXG1203C Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 7 | TJ-L4FYTGCRMFCSFLC2R-A5 LED | LED_D4.0mm | LED1, LED2, LED3, LED4, LED5, LED6, LED7 |
| 2 | CL10B104KA8NNNC 0.1uF | C_0603_1608Metric | C1, C2 |
| 7 | 0603WAF4300T5E 430 | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7 |
| 3 | 0603WAJ0103T5E 10k | R_0603_1608Metric | R8, R9, R12 |
Indicator rev 2 design files
The KiCad project lives in the hpvdt/falcon_wing_module repository on GitHub; these links point at the commit this page was built from.
Indicator rev 2: common questions
How big is the Indicator rev 2 PCB?
The Indicator rev 2 measures 55 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Indicator rev 2?
23 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Indicator rev 2 design files?
From the hpvdt/falcon_wing_module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Indicator rev 2 design in my own project?
The repository has no license, so all rights stay with hpvdt. Use it as a reference, and ask the author before reusing the design.
