HardLabs

Aircraft Joystick Reader & Regulator - Servo

hpvdt·falcon_wing_module·hardware/servo_regulator/servo_regulator.kicad_pcb

Aircraft Joystick Reader & Regulator - Servo PCB layout, top view — open source board by hpvdt
Simulate this board

About the Aircraft Joystick Reader & Regulator - Servo PCB

Aircraft Joystick Reader & Regulator - Servo is an open source PCB design by hpvdt, published on GitHub. It is a 2-layer board measuring 17 × 15.6 mm, with 18 components from 11 distinct parts.

Other key parts include the TCA6408ARSVR. By type, the board carries 7 capacitors, 5 resistors, 2 transistors, 1 IC, 1 connector and 1 inductor.

It belongs with the robotics & motion designs in this gallery.

From the project

General purpose modules for handling wing duties

The designs for the wing module reside here. The module is an evolution of two separate boards on Falcon: the distributed voltage regulators (servoregulator), and the spar load sensing boards (sparsensor). As such, their design files are included in this repository for reference in addition to the actual wing module design files.

All designs were made in KiCad, version 9.0 as of writing.

Main components on the Aircraft Joystick Reader & Regulator - Servo

TCA6408ARSVR

Aircraft Joystick Reader & Regulator - Servo bill of materials (BOM)

18 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TCA6408ARSVR
TPS563208DDCR
U1
2
2N7002K
Q1, Q2
1
CONN_01X04
Conn_01x03_Socket
J1
1
Conn_01x03_Pin
SER1
1
3.3uH
L1
2
CL10B104KA8NNNC
22uF
C1, C2
3
22uF
C3, C8, C9
2
0.1uF
C4, C7
1
0603WAF4300T5E
54.9k
R1
3
0603WAF4300T5E
10k
R2, R3, R4
1
0603WAF4300T5E
5.1k
R5

Aircraft Joystick Reader & Regulator - Servo design files

The KiCad project lives in the hpvdt/falcon_wing_module repository on GitHub; these links point at the commit this page was built from.

Aircraft Joystick Reader & Regulator - Servo: common questions

How big is the Aircraft Joystick Reader & Regulator - Servo PCB?

The Aircraft Joystick Reader & Regulator - Servo measures 17 × 15.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Aircraft Joystick Reader & Regulator - Servo?

18 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Aircraft Joystick Reader & Regulator - Servo design files?

From the hpvdt/falcon_wing_module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Aircraft Joystick Reader & Regulator - Servo design in my own project?

The repository has no license, so all rights stay with hpvdt. Use it as a reference, and ask the author before reusing the design.

More boards in falcon_wing_module

Similar boards