Downlink
hpvdt·typhoon_electronics·telemetry/hardware/downlink_board_version2/downlink_board.kicad_pcb
About the Downlink PCB
Downlink is an open source STM32 PCB design by hpvdt, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 51 components from 28 distinct parts.
Its main chip is the TPS563208DDCR, from the STM32 family. Other key parts include the AZ1117-3.3, STM32F103C8Tx and nRF24L01. By type, the board carries 16 resistors, 15 capacitors, 5 connectors, 4 ICs, 4 diodes and 3 switches.
From the project
Folder for each of the boards designed for a given project, even if there is only one board for a given project. Once a board is put into manufacture any revisions should go into a new folder/project so that the design data for all boards is easily accessible for troubleshooting
Folder for each of the boards designed for a given project, even if there is only one board for a given project. Once a board is put into manufacture any revisions should go into a new folder/project so that the design data for all boards is easily accessible for troubleshooting without needing to dig through revision history.
The .gitignore file is configured for KiCad projects (as of 2023-12-06).
Main components on the Downlink
Downlink bill of materials (BOM)
51 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | TPS563208DDCR | TSOT-23-6 | U2 |
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | nRF24L01 | nRF24L01_Breakout | U4 |
| 1 | 8M | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | SCREEN | JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical | J2 |
| 1 | GPIO | PinSocket_2x20_P2.54mm_Vertical | J3 |
| 1 | PROGRAM | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_ST_STDC14 | PinHeader_2x07_P1.27mm_Vertical_SMD | J6 |
| 1 | USB_PWR | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | BOOT0 | PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | RPi_{ON} | SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | RPi_{OFF} | SW_PUSH_6mm_H4.3mm | SW2 |
| 1 | MCU_{RST} | SW_PUSH_6mm_H4.3mm | SW3 |
| 4 | LED | LED_0805_2012Metric | D1, D2, D3, D4 |
| 1 | 3u3 | L_Taiyo-Yuden_NR-60xx | L1 |
| 3 | 10u | C_0805_2012Metric | C1, C2, C14 |
| 6 | 100n | C_0603_1608Metric | C3, C8, C9, C10, C11, C13 |
| 3 | 22u | C_0805_2012Metric | C4, C6, C7 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100n | C_0805_2012Metric | C5 |
| 1 | 10n | C_0603_1608Metric | C12 |
| 1 | 1u | C_0603_1608Metric | C15 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | 22 | R_0603_1608Metric | R3, R4 |
| 6 | 10k | R_0603_1608Metric | R5, R7, R9, R13, R14, R16 |
| 2 | 54k9 | R_0603_1608Metric | R6, R15 |
| 4 | 330 | R_0603_1608Metric | R8, R10, R11, R12 |
Downlink design files
The KiCad project lives in the hpvdt/typhoon_electronics repository on GitHub; these links point at the commit this page was built from.
Downlink: common questions
What microcontroller does the Downlink use?
The Downlink is built around the TPS563208DDCR, from the STM32 family.
How big is the Downlink PCB?
The Downlink measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Downlink?
51 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Downlink design files?
From the hpvdt/typhoon_electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Downlink design in my own project?
The repository has no license, so all rights stay with hpvdt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Downlink without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in typhoon_electronics
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k