Typhoon telemetry transmitter
About the Typhoon telemetry transmitter PCB
Typhoon telemetry transmitter is an open source STM32 PCB design by hpvdt, published on GitHub. It is a 2-layer board measuring 36.5 × 26 mm, with 20 components from 13 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the NRF24L01_Breakout. By type, the board carries 7 capacitors, 4 resistors, 3 diodes, 2 ICs, 2 connectors and 1 crystal.
From the project
Folder for each of the boards designed for a given project, even if there is only one board for a given project. Once a board is put into manufacture any revisions should go into a new folder/project so that the design data for all boards is easily accessible for troubleshooting
Folder for each of the boards designed for a given project, even if there is only one board for a given project. Once a board is put into manufacture any revisions should go into a new folder/project so that the design data for all boards is easily accessible for troubleshooting without needing to dig through revision history.
The .gitignore file is configured for KiCad projects (as of 2023-12-06).
Main components on the Typhoon telemetry transmitter
Typhoon telemetry transmitter bill of materials (BOM)
20 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | NRF24L01_Breakout | nRF24L01_Breakout | U2 |
| 1 | 8M | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | Conn_ST_STDC14 | PinHeader_2x07_P1.27mm_Vertical_SMD | J3 |
| 1 | SW_Push | SW_SPST_B3U-1000P-B | SW1 |
| 3 | LED | LED_0805_2012Metric | D1, D2, D3 |
| 1 | 10u | C_0805_2012Metric | C1 |
| 4 | 100n | C_0603_1608Metric | C2, C3, C4, C5 |
| 1 | 10n | C_0603_1608Metric | C6 |
| 1 | 1u | C_0603_1608Metric | C7 |
| 3 | 330 | R_0603_1608Metric | R1, R2, R3 |
| 1 | 10k | R_0603_1608Metric | R4 |
Typhoon telemetry transmitter design files
The KiCad project lives in the hpvdt/typhoon_electronics repository on GitHub; these links point at the commit this page was built from.
Typhoon telemetry transmitter: common questions
What microcontroller does the Typhoon telemetry transmitter use?
The Typhoon telemetry transmitter is built around the STM32F103C8Tx, from the STM32 family.
How big is the Typhoon telemetry transmitter PCB?
The Typhoon telemetry transmitter measures 36.5 × 26 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Typhoon telemetry transmitter?
20 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Typhoon telemetry transmitter design files?
From the hpvdt/typhoon_electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Typhoon telemetry transmitter design in my own project?
The repository has no license, so all rights stay with hpvdt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Typhoon telemetry transmitter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in typhoon_electronics
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k