High speed analog front end
hubjab21·high-speed-analog-front-end-pcb
About the High speed analog front end PCB
High speed analog front end is an open source PCB design by hubjab21, published on GitHub. It is a 2-layer board measuring 38.5 × 50.3 mm, with 43 components from 22 distinct parts.
Other key parts include the RP117Q252D-TR-FE, ADM7160AUJZ-2.5-R2 and LMH5401IRMST. By type, the board carries 21 capacitors, 7 connectors, 3 ICs, 2 resistors and 1 diode.
It belongs with the test & measurement and audio designs in this gallery.
From the project
High-speed analog front-end PCB with LMH5401 differential amplifier driving AD9211 ADC. Includes measurements and validation.
High-speed differential amplifier designed using LMH5401 for RF / ADC front-end applications.
This project presents the design, simulation, implementation, and measurement of a low-noise fully differential amplifier intended for high-frequency signal processing.
The circuit is based on the LMH5401, a wideband amplifier capable of operating up to GHz frequencies, commonly used in communication, radar, and data acquisition systems.

Main components on the High speed analog front end
High speed analog front end bill of materials (BOM)
43 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP117Q252D-TR-FE | SOT65P210X110-5N | IC1 |
| 1 | ADM7160AUJZ-2.5-R2 | SOT95P280X100-5N | IC2 |
| 1 | LMH5401IRMST | RMS0014A | U1 |
| 2 | Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J1, J6 |
| 1 | ZAS | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | OUT+ | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J3 |
| 1 | OUT- | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J4 |
| 2 | IN | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J5, J7 |
| 4 | 100k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | RF+1, RF-1, RT1, RT2 |
| 2 | 470 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | RG+1, RG-1 |
| 2 | 50 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Ro1+1, Ro1-1 |
| 1 | RCLAMP0582B.TCT | SOT50P160X90-3N | Z1 |
| 1 | RB552EATR | RB552EATR | D1 |
| 4 | 0.01uF | LLL18_MUR-M | C1, C2, C7, C8 |
| 4 | 2200pF | LLL18_MUR-M | C3, C4, C5, C6 |
| 1 | 5p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9 |
| 3 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C13, C14 |
| 2 | 0.01uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11, C12 |
| 2 | 2.2u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15, C16 |
| 2 | 4.7u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17, C18 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | C | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19, C20, C21 |
| 2 | 210 | R_0402_1005Metric | R3, R4 |
High speed analog front end design files
The KiCad project lives in the hubjab21/high-speed-analog-front-end-pcb repository on GitHub; these links point at the commit this page was built from.
- LayoutProjekt_AUE.kicad_pcb
- SchematicProjekt_AUE.kicad_sch
High speed analog front end: common questions
How big is the High speed analog front end PCB?
The High speed analog front end measures 38.5 × 50.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the High speed analog front end?
43 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the High speed analog front end design files?
From the hubjab21/high-speed-analog-front-end-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the High speed analog front end design in my own project?
The repository has no license, so all rights stay with hubjab21. Use it as a reference, and ask the author before reusing the design.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956