Soulbase
huming2207·soulprobe-hw·base/soulbase.kicad_pcb
About the Soulbase PCB
Soulbase is an open source PCB design by huming2207, published on GitHub. It is a 2-layer board measuring 16 × 16.4 mm, with 3 components from 3 distinct parts.
It belongs with the usb & debug tools designs in this gallery.
From the project
SWD and ESP32 firmware programmer on ESP32P4
Soulbase bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PROG_PIN | PinHeader_2x10_P1.27mm_Vertical_SMD | J1 |
| 1 | DBG_PINS | PinHeader_2x10_P1.27mm_Vertical_SMD | J3 |
| 1 | SD_PINS | PinHeader_2x10_P1.27mm_Vertical_SMD | J4 |
Soulbase design files
The KiCad project lives in the huming2207/soulprobe-hw repository on GitHub; these links point at the commit this page was built from.
- Layoutbase/soulbase.kicad_pcb
- Schematicbase/soulbase.kicad_sch
Soulbase: common questions
How big is the Soulbase PCB?
The Soulbase measures 16 × 16.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soulbase?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Soulbase design files?
From the huming2207/soulprobe-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Soulbase design in my own project?
The repository has no license, so all rights stay with huming2207. Use it as a reference, and ask the author before reusing the design.
More boards in soulprobe-hw
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389