Soulcore

huming2207·soulprobe-hw·core/soulcore.kicad_pcb

Soulcore PCB layout, top view — open source ESP32 board by huming2207

About the Soulcore PCB

Soulcore is an open source ESP32 PCB design by huming2207, published on GitHub. It is a 4-layer board measuring 45 × 40 mm, with 51 components from 20 distinct parts.

Its main chip is the ESP32-P4, from the ESP32 family. Other key parts include the W25Q128JVS and TLV62569DBV. By type, the board carries 36 capacitors, 5 connectors, 4 resistors, 3 ICs, 2 crystals and 1 inductor.

It belongs with the usb & debug tools designs in this gallery.

From the project

SWD and ESP32 firmware programmer on ESP32P4

Main components on the Soulcore

Soulcore bill of materials (BOM)

51 components, 20 distinct parts.

QtyPartRefs
1
ESP32-P4
U1
1
W25Q128JVS
U2
1
TLV62569DBV
U3
1
40MHz 10ppm
Y1
1
32.768k
Y2
1
PROG_PIN
J1
1
UART_PROG
J2
1
DBG_PINS
J3
1
SD_PINS
J4
1
USB_DBG
J5
1
2.2uH/3A
L1
2
22uF
C1, C3
2
22pF
C4, C5
18
0.1uF
C6, C7, C8, C9, C12, C13, C15, C16 +10
2
20pF
C10, C25
4
10uF
C11, C14, C20, C28
6
1uF
C17, C18, C19, C22, C27, C30
1
10nF
C32
1
4.7uF
C34
4
10k
R1, R2, R3, R11

Soulcore design files

The KiCad project lives in the huming2207/soulprobe-hw repository on GitHub; these links point at the commit this page was built from.

Soulcore: common questions

What microcontroller does the Soulcore use?

The Soulcore is built around the ESP32-P4, from the ESP32 family.

How big is the Soulcore PCB?

The Soulcore measures 45 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Soulcore?

51 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Soulcore design files?

From the huming2207/soulprobe-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Soulcore design in my own project?

The repository has no license, so all rights stay with huming2207. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Soulcore without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in soulprobe-hw

Similar boards