Nrf24l01-radio
Hung-Chi970104·nrf24l01-radio
About the Nrf24l01-radio PCB
Nrf24l01-radio is an open source PCB design by Hung-Chi970104, published on GitHub. It is a 2-layer board measuring 26.4 × 16.9 mm, with 19 components from 18 distinct parts.
Other key parts include the NRF24L01. By type, the board carries 10 capacitors, 3 inductors, 2 resistors, 1 IC, 1 crystal and 1 connector.
It belongs with the rf & radio and test & measurement designs in this gallery.
From the project
Custom 2.4 GHz nRF24L01 radio PCB with a TI AN043 printed antenna; demonstrated in a STEM-club RC car across an approximately 30 m indoor test area.
A custom nRF24L01 radio PCB with a printed antenna, demonstrated in a STEM-club RC car across an approximately 30 m indoor test area.
PCB layout · Schematic · Bring-up examples · RC-car system
Copper overview rendered from the original KiCad file. Front copper is red; back copper is blue; vias are green. Silkscreen and fabrication layers are omitted.
- Designed and built a custom nRF24L01 transceiver PCB with a meandered inverted-F trace antenna based on TI AN043. - Integrated the RF matching network, 16 MHz crystal and supply decoupling with the printed antenna. - Integrated the radio…

Main components on the Nrf24l01-radio
Nrf24l01-radio bill of materials (BOM)
19 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NRF24L01 | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | 16mhz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | Conn_02x04_Top_Bottom | PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | AN043 | AN043 | AE1 |
| 1 | 2.7nH | L_0402_1005Metric | L1 |
| 1 | 8.2nH | L_0402_1005Metric | L2 |
| 1 | 3.9nH | L_0402_1005Metric | L3 |
| 1 | 4.7uF | C_0402_1005Metric | C1 |
| 1 | 10nF | C_0402_1005Metric | C2 |
| 1 | 1nF | C_0402_1005Metric | C3 |
| 1 | 2.2nF | C_0402_1005Metric | C4 |
| 1 | 4.7pF | C_0402_1005Metric | C5 |
| 1 | 1.5pF | C_0402_1005Metric | C6 |
| 1 | 1.0pF | C_0402_1005Metric | C7 |
| 1 | 33nF | C_0402_1005Metric | C8 |
| 2 | 33pF | C_0402_1005Metric | C9, C10 |
| 1 | 22K | R_0402_1005Metric | R1 |
| 1 | 1M | R_0402_1005Metric | R2 |
Nrf24l01-radio design files
The KiCad project lives in the Hung-Chi970104/nrf24l01-radio repository on GitHub; these links point at the commit this page was built from.
- Layoutradio.kicad_pcb
- Schematicradio.kicad_sch
Nrf24l01-radio: common questions
How big is the Nrf24l01-radio PCB?
The Nrf24l01-radio measures 26.4 × 16.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nrf24l01-radio?
19 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nrf24l01-radio design files?
From the Hung-Chi970104/nrf24l01-radio repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nrf24l01-radio design in my own project?
The repository has no license, so all rights stay with Hung-Chi970104. Use it as a reference, and ask the author before reusing the design.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kRadioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Hat
pa3gsb
65 × 56 mm81 parts2LNo license675