Adafruit MS8607
About the Adafruit MS8607 PCB
Adafruit MS8607 is an open source PCB design by HydroVinci-PULV, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 25.4 × 17.8 mm, with 16 components from 13 distinct parts.
Other key parts include the AP2112K-3.3. By type, the board carries 5 ICs, 3 capacitors, 2 resistors, 1 transistor, 1 crystal and 1 jumper.
It belongs with the robotics & motion designs in this gallery.
From the project
Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.
Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.
Vous trouverez plus d'information sur le BeagleBone Blue sur la page dédiée dans le wiki du projet.
Main components on the Adafruit MS8607
Adafruit MS8607 bill of materials (BOM)
16 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT23-5 | U2 |
| 1 | — | ADAFRUIT_3.5MM | U$22 |
| 1 | — | PCBFEAT-REV-040 | U$25 |
| 2 | — | STEMMAQT | U$30, U$31 |
| 1 | BSS138 | SOT363 | Q2 |
| 1 | MS8607 | MS8607 | X1 |
| 2 | STEMMA_I2C_QT | JST_SH4 | CONN3, CONN4 |
| 1 | — | 1X05_ROUND | JP2 |
| 1 | GREEN | CHIPLED_0603_NOOUTLINE | D1 |
| 1 | 0.1uF | 0603-NO | C1 |
| 2 | 10uF | 0805-NO | C2, C3 |
| 1 | 10K | 0603-NO | R1 |
| 1 | 10K | RESPACK_4X0603 | R3 |
Adafruit MS8607 design files
The KiCad project lives in the HydroVinci-PULV/MicroTransat repository on GitHub; these links point at the commit this page was built from.
Adafruit MS8607: common questions
How big is the Adafruit MS8607 PCB?
The Adafruit MS8607 measures 25.4 × 17.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adafruit MS8607?
16 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adafruit MS8607 design files?
From the HydroVinci-PULV/MicroTransat repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Adafruit MS8607 design in my own project?
Yes, under the terms of its GPL-3.0 license, which HydroVinci-PULV chose for the repository.
More boards in MicroTransat
LIS3MDL + LSM6DS3 rev A
25.4 × 17.8 mm22 parts2LGPL-3.011
Pcb rs485
63.5 × 43.2 mm9 parts2LGPL-3.011
RP2040/RP2350Capteurs environnement
99.1 × 83 mm6 parts2LGPL-3.011
Ttl to rs485-proto
86.4 × 58.4 mm5 parts2LGPL-3.011
Ttl to rs485-stoopid
62.2 × 44.5 mm4 parts2LGPL-3.011
Ttl to rs485
71.1 × 44.5 mm4 parts2LGPL-3.011
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979