HardLabs

Capteurs environnement

HydroVinci-PULV·MicroTransat·Electronique/PCB/Capteurs/capteurs-environnement/capteurs-environnement.kicad_pcb

Capteurs environnement PCB layout, top view — open source RP2040/RP2350 board by HydroVinci-PULV
Simulate this board

About the Capteurs environnement PCB

Capteurs environnement is an open source RP2040/RP2350 PCB design by HydroVinci-PULV, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 99.1 × 83 mm, with 6 components from 2 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family.

It belongs with the robotics & motion designs in this gallery.

From the project

Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.

Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.

Vous trouverez plus d'information sur le BeagleBone Blue sur la page dédiée dans le wiki du projet.

Capteurs environnement, from the project README
From the project README

Main components on the Capteurs environnement

Pico

Capteurs environnement bill of materials (BOM)

6 components, 2 distinct parts.

QtyPartRefs
1
Pico
U1
5
~
U2, U3, U4, U5, U6

Capteurs environnement design files

The KiCad project lives in the HydroVinci-PULV/MicroTransat repository on GitHub; these links point at the commit this page was built from.

Capteurs environnement: common questions

What microcontroller does the Capteurs environnement use?

The Capteurs environnement is built around the Pico, from the RP2040/RP2350 family.

How big is the Capteurs environnement PCB?

The Capteurs environnement measures 99.1 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Capteurs environnement?

6 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Capteurs environnement design files?

From the HydroVinci-PULV/MicroTransat repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Capteurs environnement design in my own project?

Yes, under the terms of its GPL-3.0 license, which HydroVinci-PULV chose for the repository.

Can I test firmware for the Capteurs environnement without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in MicroTransat

Similar boards