Bemini atmel au

ianklug·bemini·bemini-atmel-au/bemini-atmel-au.kicad_pcb

Bemini atmel au PCB layout, top view — open source AVR/Arduino board by ianklug

About the Bemini atmel au PCB

Bemini atmel au is an open source AVR/Arduino PCB design by ianklug, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 199 × 65 mm, with 43 components from 17 distinct parts.

Its main chip is the C44854, from the AVR/Arduino family. By type, the board carries 13 relays, 8 capacitors, 7 resistors, 1 IC, 1 crystal and 1 connector.

It belongs with the keyboards designs in this gallery.

From the project

A miniature mechanical keyboard controller with a rotary encoder for staggered-key rhythm games.

Special thanks to Sebastiaan Swinkels for technical assistance.

Please clone this repository using the --recurse-submodules flag. Some of the required symbol and footprint libraries will not be included otherwise.

Please note that the RP2040 models are functional at a hardware level, but software is incomplete.

The 2.x versions (bemini-rp) use the RP2040 MCU, and require different firmware from the 1.x versions. They also include a few new features and refinements over the 1.x models, including M2 mounting holes and an RGB indicator LED.

Bemini atmel au, from the project README
From the project README

Main components on the Bemini atmel au

Bemini atmel au bill of materials (BOM)

43 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C44854
ATmega32U4-AU
U1
1
C13738
16MHz
X1
1
USB_C_Receptacle_USB2.0
J1
1
C261942
500mA
F1
13
MX-NoLED
K1, K2, K3, K4, K5, K6, K7, K8 +5
9
MX-NoLED
KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8 +1
1
Rotary_Encoder
RE1
1
C318884
SW_Push
S1
1
C1538
4.7nF
C1
1
C52923
1uF
C2
3
C1525
0.1uF
C3, C4, C5
1
C15525
10uF
C6
2
C1555
22pF
C7, C8
1
C26083
1M
R1
2
C25905
5.1k
R2, R3
2
C25092
22
R4, R5
2
C25744
10k
R6, R7

Bemini atmel au design files

The KiCad project lives in the ianklug/bemini repository on GitHub; these links point at the commit this page was built from.

Bemini atmel au: common questions

What microcontroller does the Bemini atmel au use?

The Bemini atmel au is built around the C44854, from the AVR/Arduino family.

How big is the Bemini atmel au PCB?

The Bemini atmel au measures 199 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Bemini atmel au?

43 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Bemini atmel au design files?

From the ianklug/bemini repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Bemini atmel au design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which ianklug chose for the repository.

Can I test firmware for the Bemini atmel au without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in bemini

Similar boards