Bemini rp

ianklug·bemini·bemini-rp/bemini-rp.kicad_pcb

Bemini rp PCB layout, top view — open source RP2040/RP2350 board by ianklug

About the Bemini rp PCB

Bemini rp is an open source RP2040/RP2350 PCB design by ianklug, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 220 × 70 mm, with 60 components from 23 distinct parts.

Its main chip is the C2040, from the RP2040/RP2350 family. Other key parts include the C190862 and C51118. By type, the board carries 16 capacitors, 13 relays, 10 resistors, 3 ICs, 2 switches and 1 transistor.

It belongs with the keyboards designs in this gallery.

From the project

A miniature mechanical keyboard controller with a rotary encoder for staggered-key rhythm games.

Special thanks to Sebastiaan Swinkels for technical assistance.

Please clone this repository using the --recurse-submodules flag. Some of the required symbol and footprint libraries will not be included otherwise.

Please note that the RP2040 models are functional at a hardware level, but software is incomplete.

The 2.x versions (bemini-rp) use the RP2040 MCU, and require different firmware from the 1.x versions. They also include a few new features and refinements over the 1.x models, including M2 mounting holes and an RGB indicator LED.

Bemini rp, from the project README
From the project README

Main components on the Bemini rp

Bemini rp bill of materials (BOM)

60 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C2040
RP2040
U1
1
C190862
W25Q128JV
U2
1
C51118
AP2112K-3.3
U3
1
C400505
BSS138
Q1
1
C255903
12MHz
Y1
1
USB_C_Receptacle_USB2.0
J1
1
C261942
500mA
F1
13
MX-NoLED
K1, K2, K3, K4, K5, K6, K7, K8 +5
9
MX-NoLED
KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8 +1
1
Rotary_Encoder
RE1
1
C318884
BOOT
SW1
1
C318884
RESET
SW2
1
WS2812B
LED1
1
C191023
20V 1A
D1
2
C15525
10uF
C1, C2
10
C1525
100nF
C3, C8, C9, C10, C11, C12, C13, C14 +2
2
C52923
1uF
C4, C5
2
C32949
22pF
C6, C7
1
10k
R1
2
C25905
5.1k
R2, R3
Show 3 more
QtyPartRefs
2
C25092
27
R4, R5
2
C25905
1k
R6, R8
3
C25744
10k
R7, R9, R10

Bemini rp design files

The KiCad project lives in the ianklug/bemini repository on GitHub; these links point at the commit this page was built from.

Bemini rp: common questions

What microcontroller does the Bemini rp use?

The Bemini rp is built around the C2040, from the RP2040/RP2350 family.

How big is the Bemini rp PCB?

The Bemini rp measures 220 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Bemini rp?

60 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Bemini rp design files?

From the ianklug/bemini repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Bemini rp design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which ianklug chose for the repository.

Can I test firmware for the Bemini rp without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in bemini

Similar boards